forum.pistar.uk

thanks for the answer, i was worried that my 2.4ghz @ 60 to 70 mbps was not good enough for wiresx but it seems to do just fine .

quick question, i am running pistar mmdvm 4.1.8 and in my wifi config on this pistar i noticed it is at 2.4ghz, is there anyway to get it @ 5ghz ? if so how. here is what my wifi config shows now

so my friend has a zumspot mmdvm and he recently got a new modem from comcast, after he installed his new modem the zumspot will not boot up, all it says is "Initialising" forever. we have tried to go to his dashboard to change the wifi info in his config but the dashboard page wont come u...

My experience is that the FT991A probably has some of the best C4FM audio. In about 100% if the cases poor audio is caused by the transmitting station. Once the signal is generated, nothing can change the quality or characteristics until it gets to the receiver. You may be hearing analog stations w...

i realize this is an old post but my problem is the same, 7250 cant key the pistar, it will if i shut off the 7250 and turn back on it will transmit into the pistar 1 time and them nothing after that.

FIXED :D :D :D :D :D :D :D :D :D :D :D :D Ok so, i went to his qth, i had his zumspot working at my qth, i left it like that, brought it to his place, transmitted on my ht, worked, opened his config, put in his call, transmitted on HIS radio and nothing, BUT............ i THEN SAID I AM FED UP, did...

this is fusion not dstar but i will have a look at that link , thanks. as far as his radio, its a brand new ftm400xd, many people out there reporting it woks just fine with the zumspot pistar. since i have exhausted all other causes, his pc is the only thing we have not looked at, if it simply just ...

yes his ftm400 is using simplex mode, not using any encoders/no offsets, tx and rx on same simplex frequency in DN mode, the zumspot pistar config is also set for simplex, his zumspot works fine at my house using my radios "ftm300 and ft70". I did test his ftm400 against his analog dual ba...

ok, here is what happened today: went to his qth, i think this was trip 3..... he had his call entered in his yaesu 400 as his call/his name in the pistar config it was only his call So, i said, "Theres the problem :) " changed it to reflect the same on both radio and pistar config, applie...

i think that is what the issue is, heading back up to his qth now, i will report back, thanks again to all.