Search found 39 matches
- Thu Jan 11, 2024 5:42 am
- Forum: Pi-Star General Support
- Topic: Brandmeister: Repeater ID has wrong configuration...
- Replies: 5
- Views: 1702
- Mon Jan 08, 2024 8:18 am
- Forum: Raspberry Pi Foundation Hardware
- Topic: Upgrade Pi Zero to Pi Zero 2
- Replies: 4
- Views: 14699
Re: Upgrade Pi Zero to Pi Zero 2
I bought a Zero 2WH with pre-soldered GPIO pins and just replaced the previous board. Works great.
- Tue Jan 02, 2024 5:23 am
- Forum: DMR Specific Support
- Topic: Motorola MOTOTRBO R7
- Replies: 2
- Views: 6338
Re: Motorola MOTOTRBO R7-DMR and Talkgroups
Create the Contacts: mostly talk groups and private contacts (if necessary). Add the TGs to a Rx Group List. Go to Zones (ignore Channel Pool, you won't need it), create channels inside. A channel is frequency + color code + timeslot. Assign a Rx Group List to a channel -- the radio will "open ...
- Sat Oct 14, 2023 6:22 am
- Forum: DMR Specific Support
- Topic: Pi-Star DMR Net Turns Red and Won't Connect to Private XLX Reflector
- Replies: 16
- Views: 12530
Re: Pi-Star DMR Net Turns Red and Won't Connect to Private XLX Reflector
I remember I did answer, but the post somehow disappeared.
Is your XLX reflector named with letters like XLXABC by any chance? DMRGateway only supports numbers, like XLX123, otherwise it crashes.
https://github.com/g4klx/DMRGateway/issues/118
Is your XLX reflector named with letters like XLXABC by any chance? DMRGateway only supports numbers, like XLX123, otherwise it crashes.
https://github.com/g4klx/DMRGateway/issues/118
- Mon Oct 09, 2023 7:33 pm
- Forum: Raspberry Pi Foundation Hardware
- Topic: Enclosure for Pi 4b?
- Replies: 3
- Views: 5026
Re: Enclosure for Pi 4b?
I'd suggest this one: https://www.aliexpress.com/item/4000301139337.html
Just drill a hole for the antenna. Or two :)
Just drill a hole for the antenna. Or two :)
- Sun Jul 16, 2023 5:16 pm
- Forum: Pi-Star General Support
- Topic: Cannot connect using starlink
- Replies: 3
- Views: 997
Re: Cannot connect using starlink
The Pi system may not be getting the nameserver address from the StarLink device. However, you can set it up manually from the Pi console. Connect to your Pi-Star via SSH and enter the following commands: sudo su rpi-rw rm /etc/resolv.conf echo "nameserver 8.8.8.8" > /etc/resolv.conf chatt...
- Thu May 04, 2023 11:51 am
- Forum: MMDVM_HS Hat(s)
- Topic: PLS HLP! Hytera disconnect incoming group calls or does not accept group calls
- Replies: 3
- Views: 4834
Re: PLS HLP! Hytera disconnect incoming group calls or does not accept group calls
It's a known issue. For simplex channels, enable Pseudo Trunk instead of a designated slot.
- Thu Apr 06, 2023 3:25 pm
- Forum: P25 Specific Support
- Topic: Call to P25 reflector owners
- Replies: 1
- Views: 4325
Re: Call to P25 reflector owners
63600 and 37500 are operational.
- Sun Dec 11, 2022 3:27 pm
- Forum: YSF Specific Support
- Topic: YSF2DMR how to switch to a TG with six digits
- Replies: 1
- Views: 4474
Re: YSF2DMR how to switch to a TG with six digits
It depends on the radio. FT-70D allows long numbers, whereas FT-2/3/5 doesn't.
- Sun Oct 16, 2022 8:16 am
- Forum: Raspberry Pi Foundation Hardware
- Topic: Old Raspberry Pi and Pi-Star
- Replies: 5
- Views: 5485