forum.pistar.uk

Thanks, figured it out late last night as a friend sent a screenshot of the programming used for this TG and our SK friend had it set up for a repeater hotspot.
73

Hotspot using DMR and Anytone 868 the Digital Monitor button on Anytone allows 3 settings Off, single slot or double slot. The Anytone would receive TG310410 in all three monitor selections but only double slot would pass audio. My Pistar dashboard only allows TS2 for simplex node. Does the Anytone ...

I guess you missed it in the first sentence? “ using dmr to analog and linking to an FM analog repeater via EchoLink” Open spot converts to analog and that is fed into EL at a different location with a different IP. The repeater has EL and the two are linked by a connection in EL. The different loca...

We are using dmr to analog and linking to an FM analog repeater via EchoLink and it works great but has about a 3 second delay.
Has anyone successfully interfaced a DMR hotspot to a FM analog repeater with a CAT controller
We would like analog to dmr and vice versa. Regards

Simplex frequency is red in setup Bingo. Move your frequency out of the satellite portion of the band. 435-438 Mhz, or 145.8 to 146 Mhz. When you enter an acceptable frequency it will be green. The old firmware used to not block those frequencies. You have a jumbospot, so only use the instructions ...

I flashed my hat with the wrong image. See my previous post.

Is there a compiled list of different rf hat modems for flashing?
This may be the one I need?
I don’t know the code for selecting it in ssh.

https://github.com/juribeparada/MMDVM_H ... tag/v1.3.7

I’m wondering if this is it? My original dashboard said HS Hat:v1.3.7 And rf modem selected was Zumspot-single band raspberry pi hat (gpio) https://github.com/juribeparada/MMDVM_HS/releases/tag/v1.3.7 I don’t know how to select this firmware to load. I there a list of different hats (flashes) somewh...

Used my magnifier on my smartphone and top hat says:
JamboSP

Guess that means it’s definitely generic.
The modem settings when working was:
Zumspot-Single Band Raspberry Pi Hat (GPIO)

Toast.... should have left it alone!

Tried to install 12 MHz and it wouldn’t allow in root. Installed the at_ambe one and still doesn’t work Simplex frequency is red in setup And dmr & DNR net red status These are from Amazon link. What is the radio modem type? Answer: ZumSpot - Raspberry Pi Hat (GPIO) This setting is working for m...

The leds all flash fast then green on red blinking. When you power on the board, do the LED's flash 3 times? Yes, or no? (They were so fast I had to video and scroll manually through them, yes all leds flash 3 times) Does the SRV LED flash slowly and then blink faster after a few minutes? Yes, or n...