forum.pistar.uk

Yeah, its lined up

Never mind, it does error flashing it. Just it says it was successful at the end so I didnt really look at it. Using Parser : Raw BINARY Interface serial_posix: 57600 8E1 Failed to init device. Usually when this is seen, pins 38 and 40 aren't connected to the hat.. I'd check to make sure they are, ...

No it has not. Been bashing my head into a wall since I recieved it. Wishing I knew about the MMDVM_HS_Hat now, would've bought that instead.

So I tried multiple ways trying to get it to flash, and so far, no go. I think it might be bricked. Anyway to unbrick a hat?

Never mind, it does error flashing it. Just it says it was successful at the end so I didnt really look at it.

Thanks for the replies. I flashed it using pistar-zumspotflash just now. And it completed fine, didnt show any errors. After reboot its still showing the same error. I have it set to 'Zumspot Raspberry pi hat (GPIO)' in the configuration. Is there anything I can do to diag whats going wrong besides ...

Oh, thanks for that. I will do it that way then. I program the password to an RFID chip so to program my android devices I just have to tap it and it reads it in, adding it. If I can't such as a laptop or iphone I have an app on my phone to read the RFID chip and display the contents so I just hand ...

My Access point allows 63 chars so Im going to use 63 chars. Plus I'd have to go rekey all my devices for one device that has an issue.

So my wifi password is 63 characters and any time I edit it using the web interface, such as to add another wifi, it is getting cut to 53 characters, which makes it not work. So is there a way to make it not do that or can it be fixed?

Ive been struggling to get this thing to connect to the master, and I finally found the logging button and Im getting this at the end of the output M: 2018-06-07 01:15:25.057 Opening the MMDVM E: 2018-06-07 01:15:37.873 Unable to read the firmware version after six attempts So I dont know if that no...