forum.pistar.uk

There is nothing to add. Andrew explained everything "pi-star special" to implement your own firewall rules. I've done it the same way. You have to know, with which protocol and on which port(s) your vpn software is communicating. Maybe you will find this in the documentation of your vpn s...

Hi Bill,

I'm using OpenVPN with my Pi-Star 3 based repeater since several months here. No problems so far.
It can easily installed via "apt-get install ...". After the configuration you have to modify the firewall rules of Pi-Star to let the daemon communicate.

Hi w7efs, Examine the "MMDVM Display Type:" pull-down menu in the "MMDVMHost Configuration" section of the Configuration page. If your display type is listed there then your answer is "yes". Are you really sure? I can't believe this, because there are three things: - If...

Good news:

The Display is now working. Forgot a GND wire to the displays R/W pin...

So there is one question left:

Is the mmdvmhost version, contained in Pi-Star, compiled with HD44780 support?

73s de Thomas, DG0OFZ

Hi, I've connected a HD4478 LCD module to my Raspberry Pi 2 which is running Pi-Star. The wiring is done like described in https://github.com/g4klx/MMDVMHost/blob/master/README.HD44780 . I'm not using I2c. But it isn't working. https://forum.pistar.uk/posting.php?mode=post&f=3# The Display shows...

Hi, some days ago I'd liked to upgrade the firmware of my STM32-DVM V3 board. But all I've seen is Using Parser : Raw BINARY Interface serial_posix: 57600 8E1 Unknown/unsupported device (Device ID: 0x421) This output seems to come from stm32flash, which is installed in version 0.4. Does this binary ...