forum.pistar.uk

Hi I have an RFinder MMDVM sent to me to get going for a new ham but come to a standstill as none of the downloadable Images will run on it. It has a Nano Pi Duo2 board in it but no Image I run seems to work. Thare was a link to get the chineese version which it had in it but the file ended up being...

I certainly Hope that this is not now what happens with the latest version when a site loses power and internet. Living in aearthquake zone as we do Here theres every chance that power and internet disappears from a site for possibly days or weeks on end. at least with the previous versions if only ...

Hi, I have tested and had this running fine on my repeater running Pi-star It would only go into stand alone repeater if Auto AP is enabled (default) in firewall configuration section I found So unless something has been changed or broken in pi-star the sequence is as below 1. MMDVM repeater powers ...

Actualy it doesnt appear that the APRS server reconnects after the updates happen either. I restarted my VHF high power system 22hours ago and was using it last night and location data was working up to turning in for the evening, on using my radio here this afternoon location data wouldnt show unti...

After patiently waiting for pi-star updates 20210305 to come in and hoping that a fix would be in the updates to rectify the APRS disconnection at 0.00 UTC unfortunately there was not, it still disconnects. So I decided to download from pi-star downloads a clean version 4.1.4 and installed, configur...

APRS Server connections all stop working at 13.00 NZ Time every day (0.00 UTC) I have 3 Pistar systems here that I have connected and tried on all 6 of the APRS Servers in pistar and they all disconnect at 1.00 pm everyday/Afternoon and tracking will not work untill the systems are rebooted. Of cour...

There is 2 switches on the mmdvm board,
does the 1 marked boot have to be changed before doing the firmware update.

or do you just leave everything as it has been running and follow these instructions.

Doug ZL3DMH

I am trying to help a new station to DMR get a MMDVM_HS_HAT_DUPLEX board set up with the correct TX deviation level using mmdvmcal, I get everything set up on the screen and am in mmdvmcal DMR deviation section (D) but am unable to toggle TX with the space bar as it should/usually does.. Is there so...