forum.pistar.uk

The reason I started with just the USB-TTL is that on a previous attempt the driver failed to load when the Nextion and TTL was connected. The end result was successful, I have 115200 speed working now as well. I'll be repeating with another simplex hotspot and smaller screen so I'll do some more te...

Ok got it running with a bit of a struggle, apologies if my recollection of the exact sequence is inaccurate. I rebuilt the SD card, installed and ran the Rpi setup with the USB-TTL connected but no screen. Setup the basic d-star setup and MMDVM selection. I then shutdown and connected the Nextion S...

Thanks again, I had already started a rebuild, I intend installing the driver with the USB connected and without the Nextion, once the driver is installed I’ll connect the Nextion. I doubt it’s a card issue the card is a high endurance Sandisk 32gb. One of the problems is that there there is a lot o...

Jason, Thanks for your reply. Some additional info. Hat is duplex MMDVM CPU is pi ZeroW I found a post regarding logs, your suggestion was to "Go to the Expert configuration and under the [NextionDriver] section set the LogLevel=6 apply changes." I can't find any setting in the pi-star exp...

Hi guys, I have been battling with a Nextion screen trying to get touchscreen buttons working. The Pi-star version is 4.1.5 Nextion is basic Touch resistive. USB to TTL converter (6 pin) connected to /dev/tty/USB0 Screen is working as expected for all Pi-star update messages. I have 2 buttons on the...