forum.pistar.uk

Hello W9FYI

Try the following these steps on a FT70 by using Wires-X style commands. I never have been able to make either my FT2 or FT70 work consistantly via DTMF. As you stated your totally blind so I hope these directions are compete enough.

Connect to your hotspot by

Pressing Funtion Key ...

I was wondering if it's possible to make the Wires-x ID numbers that are used to connect to the FCS reflectors match the FCS reflector numbers?

When using a Ft-70D handheld connecting to the reflectors using the Wires-X method ID number as it has no lookup capability. That number is sequential ...

Below is the text from the Yaesu rep John Kruk that was posted on Facebook System Fusion Group.

Link to facebook group https://www.facebook.com/groups/YaesuSystemFusionOfficial/


The next to the last paragraph explains why the YSF/FCS do not save permentaly in the 5 wires-x channels.

John Kruk ...

W1FJM

Goto

Configuration
Expert
MMDVMHost
Scroll Down to Nextion
You can erase /dev/ttyUSB0 with back space and type in /dev/ttyNextionDriver.
Apply
should look like the following

https://www.dropbox.com/s/i1s7pukkaanyjos/2018-11-11%2019_00_16-Pi-Star%20-%20Digital%20Voice%20Dashboard%20 ...

The FCS reflectors numbering begins at 10 except the Parrot which is 00001 and are sequential. The attached listing was made by going to https://www.pistar.uk/fcs_reflectors.php and doing select all and copy and paste to Notepad++. I then striped the blank lines and the headers. I added the first ...