forum.pistar.uk

Hi ALL,

finally I did it.

I followed patiently all the hints and found after several mistakes a 8-GB-SD-Card that worked.
It was a cheap No-Name card.

vy 73 Frank DD5MA

Thanks for all the answers. But I have still not solve my Upgrade problem. - I have used 5 different new SD-Cards - no success, no booting. I have in between successfully upgrated the Firmware of my Jumbohat Kernel 4.9.35+ Pi Zero W Rev 1.1 (512MB) 14.7456 MHz from V.1.3.3. to 1.5.2. dated 20201108....

KG6RUT wrote: ↑Sun Sep 05, 2021 2:44 pm On my Model B+ Rev 1.0 with an 8GB card, it took 8-10 minutes for it to fully come up....so I agree with Jason you probably havent waited long enough.

The card gets expanded on first boot so its going to take longer than usual....

I tried for 30 Minutes, no boot.

That is my Jumbo.

Please see my added files.

Still 4.1.5. does not boot.

Must I update the Firmware of my hat?
Actual is 1.3.3. and Linux pi-star 4.9.35+

Where can I find any update and how to do it?

orry to bother you.

vy 73 Frank DD5MA

My Pi Zero W Rev 1.1 (512MB) works fine with 3.4.17. Now I tried to update to 4.1.5. but after I followed all procedures my MMDVM_HS does not boot! I wrote the Pi-Star_RPi_V4.1.5_21-Jun-2021 to a 16GB SD-Card. Is there perhaps a missunderstanding that I cannot use the Pi-Star_RPi_V4.1.5_21-Jun-2021 ...