forum.pistar.uk

Live logs

: 2025-03-13 20:20:59.432 AX.25 TX Level: 50.0%
I: 2025-03-13 20:20:59.432 TX Frequency: 443450000Hz (443450000Hz)
I: 2025-03-13 20:20:59.432 Use COS as Lockout: no
M: 2025-03-13 20:20:59.433 Opening the MMDVM
E: 2025-03-13 20:21:12.262 Unable to read the firmware version after six ...

I had to redo my Zumspot configuration.

The Zumsport lights up green when I transmit and Pi-Star shows my call sign and the channel i am transmitting on

However , my transmission does not show up on the Brandmeister website and I get no response to my test transmission.

Any suggestions as to what ...

Okay, I figured it out. I did not have Hotspot security enable...forgot about that one!! Thanks

I formatted the SD card with SD Card Formatter. I downloaded PiStar 4.1.4. Unzipped it.
Flashed it to the SD card with Etcher.
Created and copied wma file to SD card.

Installed card in Zumspot, after a while the WiFi saw it and I went through the config process.

When I open the Dashboard and ...

I seem to have the update working a bit. I can see my self transmitting, however I am not receiving anything.

I must have some config setting wrong.

Any suggestions would be appreciated.

I forgot the wma file....

I followed the steps in the recommended video to create a new image.
Downloaded PiStar 4.1.4, unzipped
Formatted SD card with SD Card Formatter
Used Etcher to move image to SD card.
Turned off Zumspot.
Inserted new card with new image...Nothing.
Tried using Pi IP address nothing.
Pi 0 with WiFi.

I ...

Okay, I saw the fix above. When I did the factory reset, it reset to RadioID, but when I changed it back to QRZ and applied changes it worked!!

THANK YOU, THank YOU, tHANK YOU.

I appreciate all the work that has gone into pi-star software, but REALLY REALLY hate that it now defaults to Radioid instead of QRZ. I used to be able easily keep a log of my DMR contacts by clicking on the call sign, but that functionality is gone.

PLEASE switch the default back to QRZ or maybe ...

That would explain it!!