forum.pistar.uk

Hi,

We did some tests using a new "fresh" installation of 4.1.8 without any italian patches and unfortunately the problem persists.
I read another amateur from Spain with the same problem (see: https://forum.pistar.uk/viewtopic.php?t=4784 ).
In our opinion it shouldn't be a regional issue.

Thanks ...

Hi all,

It seems that with the last Pistar upgrades to version 4.1.7, 4.1.8 the YSF section has some working problem; several italian amateurs claims this situation.
At the first startup, the Pistar works fine for some minutes; after this time the Pistar doesn’t send on the network your ...

Dear All,

In YSF2DMR how can I switch to a TG with 6 digits (like i.e. TG 222051) ? The C4FM radios accept an input of only 5 digits.

Thanks

Yes I tried to replace the initial 9 with a 8 but in my case it doesn't work.

Thanks
Massimo

A friend of mine explained me that on FT5D/FT3D etc when you push the "enter" at the end of the string it' equivalent at the final # you suggested me.

I found on the web that also M0FXB tried this procedure without success. Look at his video: https://www.youtube.com/watch?v=2oGtR_2oxlw&ab_channel ...

Not possible to put a # at the end of the command; Yaesu radios accept only 6 characters (including the initial #).

regards
IK4SWW, Massimo

Thanks for your answer. I tried your suggestion using the rooms nos command, but when I call #99996 the hotspot connects to a chinese room instead to shutdown. Moreover when I call #99997 or #99995 nothing happens.

Thank you
73 de IK4SWW

Dear all,

I enabled the pi-star remote commands in order to Shutdown, Reboot etc my hotspot via RF. I tried these commands with FT5D and with FT1XD but unfortunately they don't work. My settings are as follow:

[enable]
# Is the Pi-Star Remote Enabled? (true|false)
enabled=true

[keeper]
# Keepers ...

Many thanks Andy for your support.

73 de IK4SWW

Except it has one batch of data -- for 7 "blocks", whereas the other has three batches of data, of 2, 2, and 0 blocks. That 0 block transaction would concern me. There is NO "Data Preamble" associated with the last set.


Thanks for your reply. The Anytone 878 sends the APRS position, instead ...