forum.pistar.uk

Everything indicates that it is working. Only thing that is not working is RF rx/tx.

Have been debugging it with the board developer (which is very helpful).
Have x-tested with two radios, a RPi3 and RPiZ, and Jumbo mmdvm board.
Might have died during transportation.

Thanks. No I'm in the 433 range.
Tried the CAL procedure, but no signal at all. Tried with another DMR radio, but same result.
So module must be defect I guess.

Hi I have a RPi3B+ with a Chinese Jumbospot and Nextion 2.4 (USB) display. Working fairly well. Just received a Lonestar simplex board. Replaced the Combo with the Lonestar, and set RX/TX offset to 0 (as on the box). The setup receives the data from wifi and displays it correctly, but I have no sign...

I always have AMS off on the digital channels. Have just tried to enable, but same honk is heard (expected).

Seems no resolution on this issue? I have one zumspot in operation, and three jumbospots in the drawer. All four have this loud honk sound on the FT-70 and a FT-3D. I have recently got a openspot3 and this one does have this at all, tested on both radios. So it must be something on the MMDVM boards ...

Not sure Bi7JTA are quality Hats, however found this one also:
Genesis RED
https://www.dvmega.co.uk/MMDVM%20v2.0%2 ... hield.html
Anybody that knows this?

Hi I have currently a RPi3b+ with Nextion 2.4 (USB) and then a cheap Jumbospot Hat. The Jumbospot is unstable (surprise...). I have tried to calibrate both RX and TX with my DMR radio, but still not satisfied. I would like to buy a quality Hat for this setup. I shall be able to buy it in Europe as I...

So started all over on another SD card, and without install the driver. The display works now :-) One issue I also had before was that the USB option was not present before installation of the NextionDriver. Then it appeared. And now after installing the NextionDriver and afterwards checking the ins...

Thanks for responding. It is a completely new setup. After doing the initial setup and checking that YSF was working, I did run the procedure as described with git clone and install.sh, and after that i also did that check of the installation. After the first check, then MMDVMHost was not configured...

Some more details: sudo NextionDriverInstaller/check_installation.sh + This seems to be Pi-Star ---------------------- Searching MMDVMHost ... ----------------------- + MMDVMHost found at /usr/local/bin/MMDVMHost + Searching MMDVMHost configuration file ... + MMDVMHost configuration file found at /e...