Search found 6 matches

by KD2KBU
Wed Jul 17, 2019 2:23 pm
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Unable to read firmware version
Replies: 2
Views: 5616

Re: Unable to read firmware version

Thank you for the suggestions. It is an authentic Zumspot and the problem began after I tried to update (or upgrade?) the FIRMWARE for the device. After reading up on it in some other threads, it seems like sometimes, it just takes several attempts to successfully update the FIRMWARE. I tried a few ...
by KD2KBU
Sun Jul 14, 2019 8:00 pm
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Unable to read firmware version
Replies: 2
Views: 5616

Unable to read firmware version

My Zumspot (Raspberry Pi Zero) is red (Instead of green) under MODES ENABLED on the dashboard. I ran live logs during a reboot and the following came up (in part) M: 2019-07-14 19:56:38.888 Opening the MMDVM E: 2019-07-14 19:56:42.704 Invalid length received from the modem - 254 E: 2019-07-14 19:56:...
by KD2KBU
Sun Dec 16, 2018 2:21 pm
Forum: YSF Specific Support
Topic: Connecting to FCS vs YSF
Replies: 23
Views: 39140

Re: Connecting to FCS vs YSF

I assume you have figured this out by now, but in case there are others wondering the same thing... On the FT-70D,you press the F key and then the AMS key and you SHOULD connect to the Zumspot in WIRES-X mode. I know, its not actually WIRES-X, but this is the MODE that allows you to use WIRES-X func...
by KD2KBU
Tue May 15, 2018 7:48 pm
Forum: YSF Specific Support
Topic: Connecting to FCS vs YSF
Replies: 23
Views: 39140

Connecting to FCS vs YSF

I am using a Yaesu FT-70DR with a ZUMsppot and Raspberry Pi Zero W. I know that if I want to connect to a YSF room I can enter the 5 digit YSF number for a given room on my radio and connect- for example for the Alabama Link, I would enter 02034 and then push the AMS key on the radio to connect. I k...
by KD2KBU
Tue May 01, 2018 2:52 pm
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Current Firmware version?
Replies: 3
Views: 4914

Current Firmware version?

Hello, All- I am running a ZUMspot on a Raspberry Pi Zero W. I have performed the sudo pistar-zumspotflash rpi and have version 1.3.3 Is this the current version? I have seen mention elsewhere of 1.3.4 but have not been able to verify. Nor does that version load when performing the FLASH command men...
by KD2KBU
Sat Apr 14, 2018 8:07 pm
Forum: WiFi Setup
Topic: Cannot find pistar.local
Replies: 6
Views: 38227

Cannot find pistar.local

Hello All- I have set my ZUMspot up and it works well at home. When I try and set it up at a different location, I am successful utilizing the AutoAP function and can connect the ZUMspot to the WiFi. I can utilize the ZUMspot to talk. The problem I am having is that once the ZUMspot is connected, I ...