Search found 93 matches

by K2IE
Thu Nov 19, 2020 2:16 pm
Forum: D-Star Specific Support
Topic: How to Connect to XLX using XLXnnnAL
Replies: 1
Views: 176

How to Connect to XLX using XLXnnnAL

I see a lot of misinformation posted here and in other places about how to connect to an XLX reflector using Pi-Star. I have seen threads from otherwise knowledgable folks claiming you must use an XRF or DCS connect string to connect to an XLX reflector. This is plain wrong. You can connect to an XL...
by K2IE
Fri Nov 13, 2020 11:42 pm
Forum: POCSAG Specific Support
Topic: DAPNET Gateway to Email (dapgw2email)
Replies: 2
Views: 2409

Re: DAPNET Gateway to Email (dapgw2email)

Is SMTP in the /etc/dapgw2email.conf file set?

Eg. SMTP = 1.2.3.4
by K2IE
Wed Nov 04, 2020 6:05 pm
Forum: YSF Specific Support
Topic: Yaesu FT-70D problem
Replies: 6
Views: 449

Re: Yaesu FT-70D problem

Radio must be in DN mode. Wide won't work with YSF reflectors.
by K2IE
Thu Oct 08, 2020 5:36 pm
Forum: D-Star Specific Support
Topic: Reaching XLX/DCS 029C
Replies: 3
Views: 282

Re: Reaching XLX/DCS 029C

If it is truly an XLX you don't need to edit anything. Just access it via the XLX name using your radio. Unless you MUST do it via DTMF.
by K2IE
Wed Oct 07, 2020 6:25 pm
Forum: Pi-Star General Support
Topic: Install Wireshark on Pi-Star?
Replies: 2
Views: 213

Re: Install Wireshark on Pi-Star?

rpi-rw
sudo apt-get update
sudo apt-get install tcpdump

You'll need to capture your data with tcpdump and then move it over to another machine running Wireshark. Since you've asked the question I'll assume you know what you're doing here...

73
by K2IE
Sat Oct 03, 2020 1:47 am
Forum: D-Star Specific Support
Topic: No XLX reflectors in D-Star Configuration for Default Reflector - RESOLVED
Replies: 8
Views: 965

Re: No XLX reflectors in D-Star Configuration for Default Reflector

There is just no reason to have to do this nor is this how I do it on my native Naylor code installation of ircddbgateway. On the native installation, in the ircddbgateway config I set: reflector1=XLX020 A atStartup1=1 xlxEnabled=1 xlxHostsFileUrl=http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster Then...
by K2IE
Fri Sep 18, 2020 5:34 pm
Forum: Pi-Star General Support
Topic: AMERICALINK via D-STAR in my PI? (Newbie Question)
Replies: 4
Views: 495

Re: AMERICALINK via D-STAR in my PI? (Newbie Question)

This is a FAQ.

There is no protocol translation in Pi-Star to or from D-Star. This would require additional hardware that is not part of the supported MMDVM devices.

73
by K2IE
Tue Sep 08, 2020 12:02 pm
Forum: Pi-Star General Support
Topic: Prime.tgif.network static TG
Replies: 9
Views: 935

Re: Prime.tgif.network static TG

Here is what I use for TGIF Prime with HBlink:

StartRef0=nnnnn;StartRef1=nnnnn

0 would be on TS1, 1 would be on TS2.

73
by K2IE
Tue Aug 04, 2020 5:00 pm
Forum: DVAP Dongle
Topic: DVAP Power Setting in Expert Mode
Replies: 2
Views: 882

Re: DVAP Power Setting in Expert Mode

The power range for the DVAP is -10 to +10.
by K2IE
Sun Jun 14, 2020 2:39 pm
Forum: Feature Requests
Topic: Ability to turn off ircddbgateway
Replies: 16
Views: 4818

Re: Ability to turn off ircddbgateway

Just saw this, thanks so much!
MW0MWZ wrote:
Wed May 06, 2020 2:33 pm

That's a good idea, so its now automatic, if you are using a gateway address of anything other than the local host (127.0.0.1), ircDDBGateway cannot start.