forum.pistar.uk

Thanks for that. I was trying to run two radios - a DMR and C4FM (not at the same time, just wanted everything active so I could use either). Figured the DMR would connect and use DMR/DMR2YSF and the Yaesu would connect and use YSF/YSF2DMR. So I'm back to having two 'profiles' - one for DMR/DMR2YSF ...

I can't get YSF to set - turn on then Apply Changes and always comes back turned off if I also have DMR and DMR2YSF On. Thought it might be a corrupt Backup (I have several to set various profiles) so I did a factory reset and manually entered everything from scratch and no joy - still refuses to st...

Got it sorted and here are my notes: For WiresX radios with YSF2DMR enabled: Hold # YSF Room# to link a Room Hold * to Unlink Hold # 00002# to link to YSF2DMR Hold # DMR-TG# to link a TG Hold # 04000# to Unlink TG then Hold * to Unlink from YSF2DMR and back to nothing linked Note: Sometimes you need...

It looks like it is not possible to use the 400 (or 500) with pi-star hotspots if you want to get the YSF room/TG menu to add to category. Would be interesting to know what they are doing differently so pi-star could implement for the 400/500 to work.

I have YSF2DMR working now. Set Config to Startup Host: None, Passthrough On, DMR TG to 4000. Use the radio to navigate and be sure to unlink DMR TG (04000) then YSF2DMR (00002) when done. * After applying changes to Config, you may have to enter expert mode and set Fusion System and Fusion System N...

It looks like it is not possible to use the 400 (or 500) with pi-star hotspots if you want to get the YSF room/TG menu to add to category. Would be interesting to know what they are doing differently so pi-star could implement for the 400/500 to work.

Wasn't expecting .7 to fix the issue, just stating it exists in both versions. I tried to remove the 4000 from DMR TG in Fusion Config but it keeps coming back. And every time I make a change to Config and Apply it sets System Fusion and System Fusion Network back to zero and I have to go into exper...

For WiresX radios with YSF2DMR enabled: Hold # YSF Room# to link a Room Hold * to Unlink Hold # 00002# to link to YSF2DMR Hold # DMR-TG# to link a TG Hold # 04000# to Unlink TG then Hold * to Unlink from YSF2DMR and back to nothing linked Note: Sometimes you need to key the mic to wake up the HotSpo...

Just upgraded to .7 but was doing this on .6 as well

If you use the YSF Link Manager to Link 00002 YSF2DRM then use the Manager to Unlink it goes into an Unlink loop constantly announcing on the radio.

Config is set with Startup Host: None and DMR TG 4000 (Disconnect)

Using the Mic key * works fine

If anyone has the 400 and has successfully connected to a HotSpot, selected a YSF Room, and was able to tap on the room to get the magic second page with the Add button to put it into a Category please contact me. Every room I select and tap on returns 'No Data' and never the screen with the Add But...