Search found 50 matches

by g7kbr
Fri Aug 25, 2023 8:48 am
Forum: D-Star Specific Support
Topic: timeout of linked reflector
Replies: 1
Views: 4032

timeout of linked reflector

Hi all I am running the latest version of pi-star and have the D-Star mode activated on the repeater. Now if a user connected to say REF001C and uses it. But forgets to un-link it stays linked forever. I want to add a link timer set, but at the moment I can see the setting, I looked in IRCDDBGateway...
by g7kbr
Sun Apr 16, 2023 8:06 am
Forum: Other MMDVM Modem Boards
Topic: Original ZUM 1.0 + DUE -any way to verify operation?
Replies: 12
Views: 15050

Re: Original ZUM 1.0 + DUE -any way to verify operation?

Also having a problem with zum radio v1.0 and Due. It appears that the boards all talk to each other. LEDs flash on the ZUM if pi star settings are changed. It doesn't seem to respond to the tx rx radios (GM350's). I assumed that platform.txt needed to be altered as the build.txt suggests. Has anyo...
by g7kbr
Thu Mar 17, 2022 5:46 pm
Forum: Pi-Star General Support
Topic: TXLevel change of percentages on other modes
Replies: 0
Views: 2056

TXLevel change of percentages on other modes

Hi all

Can some confirm, if I have say DMR RX level at 32 and D-star at 45. What should the main TXlevel in modem section be? 100% and the other modes have their own levels? Don’t want them to be at 100%.

Hope the above makes sense.

Regards

Paul
G7KBR


Sent from my iPhone using Tapatalk
by g7kbr
Sun Sep 12, 2021 10:49 am
Forum: YSF Specific Support
Topic: No data received back
Replies: 0
Views: 1655

No data received back

Hi all, currently running a repeater is multi mode. YSF, D-STAR and DMR. All ok except users aren’t able to get data back so they can change to different rooms. As an admin I can manually move it onto a room say FCS105 and radios are able to work the room I have manually linked. But now users get ba...
by g7kbr
Thu Sep 02, 2021 6:43 am
Forum: YSF Specific Support
Topic: When in YSF modem on pistar the BER is showing ??%
Replies: 0
Views: 1270

When in YSF modem on pistar the BER is showing ??%

Image

When in YSF modem on pistar the BER is showing ??% pi-star 4.1.5/Dashboard 20210721.

BER percent is ok on d-star and DMR.

Any ideas?

Regards

Paul


Sent from my iPhone using Tapatalk
by g7kbr
Sun Aug 08, 2021 8:02 pm
Forum: MMDVM_HS Hat(s)
Topic: STM32-DVM RSSI
Replies: 10
Views: 16024

Re: STM32-DVM RSSI

I too would like to have a procedure to obtain values to enter in the look up table. I have access to an HP service monitor if that helps. I realize this will be a non-linear data table. To further compound things, Repeater-Builder V3 board has a pot to adjust the RSSI voltage. Many thanks in advan...
by g7kbr
Sun Aug 08, 2021 5:29 pm
Forum: Other MMDVM Modem Boards
Topic: STM32 repeater builder pi-hat RSSI setup
Replies: 0
Views: 5637

STM32 repeater builder pi-hat RSSI setup

Hi all I have a STM32 repeater builder pi-hat board on my MMDVM repeater. I would like to setup the RSSI, but need to know how to setup the RSSI pot. If I go into MMDVMCal and run the RSSI test. I can see the figures and if I adjust the POT this figure changes. I have my radio test setup on RX and c...
by g7kbr
Wed Jul 21, 2021 6:14 am
Forum: Raspberry Pi Foundation Hardware
Topic: MMDVM boards (BI7JTA&VR2VYE), raspberry PI case
Replies: 1
Views: 5534

MMDVM boards (BI7JTA&VR2VYE), raspberry PI case

Hi All I have one of the Winters CN MMDVM boards (BI7JTA&VR2VYE) and would like to find a suitable raspberry pi case for both. This is going into a MMDVM repeater. Wonder what is available, ideally I would like to gain excess to the POTS and ideally see the status LED's. Your feedback would be m...
by g7kbr
Mon Jul 19, 2021 10:22 am
Forum: MMDVM_HS Hat(s)
Topic: MMDVM Hat won't RX in Duplex Mode
Replies: 20
Views: 15677

Re: MMDVM Hat won't RX in Duplex Mode

m0guy wrote:no the one I compile doesn't work... well pistar-findmodem doesn't see it. The HEX I posted does work fine though.

I'm still tinkering with the build to try and figure out what's wrong.
Ok thanks I’ll try your Hex tonight.


Sent from my iPhone using Tapatalk
by g7kbr
Mon Jul 19, 2021 10:17 am
Forum: MMDVM_HS Hat(s)
Topic: MMDVM Hat won't RX in Duplex Mode
Replies: 20
Views: 15677

Re: MMDVM Hat won't RX in Duplex Mode

Sorry for the delay.. I temp lost access to my forum account (I changed some settings ) Attached is the latest version of the firmware which I found deep searching the internet. This version works on my POG boards. I've also attached a docker script which follows your procedure to compile the last ...