Search found 267 matches
- Fri Apr 26, 2024 4:29 am
- Forum: WiFi Setup
- Topic: 2.4 or 5ghz ?
- Replies: 3
- Views: 768
Re: 2.4 or 5ghz ?
Generally speaking, Pi's will connect to the best/strongest signal/channel. You can probe your system's status with these commands: iwlist wlan0 channel sudo iw dev wlan0 scan 2>&1 | grep -e "SSID:\|associate\|signal:" | sed "/associated/ {N;s/BSS.*\n\(.*\)/\1 */g}" | sed &qu...
- Mon Apr 22, 2024 1:24 am
- Forum: Pi-Star General Support
- Topic: Pi-Star 4.2.1 Upgrade
- Replies: 6
- Views: 696
Re: Pi-Star 4.2.1 Upgrade
Yes. The 4.1.8 version (running under the Buster version of PiOS) can not be update/upgraded to the 4.2.1 version (running under the Bullseye version) - you must re-image.
- Mon Apr 15, 2024 12:39 am
- Forum: IP Networking
- Topic: Incorrect time and date
- Replies: 7
- Views: 5344
Re: Incorrect time and date
You did not indicate which version of Pi-Star image you're running here and what hardware it's running on. It looks like you've got several problems going on here. But my pi-star is stuck on GMT or UTC even though my pi is on BST For starters, let's see what time zone your system thinks it in: sudo ...
- Fri Apr 05, 2024 12:53 pm
- Forum: Pi-Star General Support
- Topic: 4.3.0 Beta feedback
- Replies: 57
- Views: 6156
Re: 4.3.0 Beta feedback
pi-star@pi-star(ro):~$ sudo systemctl status NextionDriver.service Unit NextionDriver.service could not be found. Sorry, my error: should have been lowercase: sudo systemctl status nextiondriver.service pi-star@pi-star(ro):~$ ls -la /dev/ttyAM* crw-rw---- 1 root dialout 204, 64 Apr 5 08:46 /dev/tty...
- Thu Apr 04, 2024 3:31 pm
- Forum: Pi-Star General Support
- Topic: 4.3.0 Beta feedback
- Replies: 57
- Views: 6156
Re: 4.3.0 Beta feedback
Out of curiosity, what results do you get for these commands?
Code: Select all
ls -la /dev/ttyAM*
Code: Select all
sudo systemctl status nextiondriver.service
Code: Select all
grep -shie "NextionDriver: " {/var/log/syslog.1,/var/log/syslog}
- Sat Mar 30, 2024 10:19 pm
- Forum: Pi-Star General Support
- Topic: raspberry pi with ssd
- Replies: 11
- Views: 1215
Re: raspberry pi with ssd
DId you modify the Pi-Star image according to the instructions given above BEFORE you transferred it to an SSD? The modifications required to boot from non-microSD cards must be applied on a booted microSD card image before cloning the image to a different kind of device, regardless of whether that ...
- Sat Mar 23, 2024 10:59 am
- Forum: Pi-Star General Support
- Topic: Configuration page and ColorCode=0
- Replies: 3
- Views: 1242
Re: Configuration page and ColorCode=0
In configure.php, change: // Set MMDVMHost DMR Colour Code if (empty($_POST['dmrColorCode']) != TRUE ) { $configmmdvm['DMR']['ColorCode'] = escapeshellcmd($_POST['dmrColorCode']); } to: // Set MMDVMHost DMR Colour Code if (isset($_POST['dmrColorCode'])) { $configmmdvm['DMR']['ColorCode'] = (int)$_PO...
- Thu Mar 21, 2024 3:25 am
- Forum: Pi-Star General Support
- Topic: MMDVM Hat flash not working
- Replies: 5
- Views: 1041
Re: MMDVM Hat flash not working
Issue this command instead and go from there:
Code: Select all
sudo pistar-modemupgrade
- Sat Mar 16, 2024 8:26 pm
- Forum: IP Networking
- Topic: Can I run Pi-Star without Wi-Fi?
- Replies: 2
- Views: 917
Re: Can I run Pi-Star without Wi-Fi?
Yes, you can run ethernet only, without wifi. Generally, the hotspot should connect to ethernet as its first choice, and basically ignore the wifi thereafter, assuming an ethernet connection is valid/viable at bootup. Things can get messed up after that if that connection window is missed. Have you ...
- Fri Mar 08, 2024 11:53 pm
- Forum: Pi-Star General Support
- Topic: raspberry pi with ssd
- Replies: 11
- Views: 1215
Re: raspberry pi with ssd
https://blog.alexellis.io/booting-the-raspberry-pi-5-from-nvme/ Actually, not a lot of magic involved: a couple of SED commands that make some simple changes to three files on an existing system and the image is ready to be cloned/booted to/from other SD cards, USB's, SSD's and NVME's. but wich com...