forum.pistar.uk

Hi. I've noticed that the 'DMR Network' password is resetting to a default? "raspberry" whenever Pi-Star is rebooted. Upon a reboot, I must change the password each time in Expert>MMDVMhost to 'passw0rd' I am running Pi-Star:4.0.0-RC4 / Dashboard:20190628 Not sure if this is a bug or not. ...

Still no joy with RF connections to the repeater. The repeater keys up and transmits digital data(when monitored on an analogue/FM receiver) but nothing appears in the dashboard -either in the Gateway Activity nor the Local RF Activity. The connect tone on the DMR radio is a steady tone, indicating ...

Hi Dennis, Thanks for the reply.. I believe that repeater IDs are typically 6 digits, but you did alert me to a problem. The Brandmeister repeater page shows VE3RIG hasn't been connected since June 28th, even though the BM API is working and I am able to make talkgroup changes via the Pi-Star dashbo...

Experiencing the same issue. I have an STM32_DVM Pi Hat on a RPi 3B+ connected to a Yaesu DR-1x repeater. D-STAR works just fine, but neither my MD380, nor my CS-700 will connect. Live Logs indicates: M: 2019-07-02 01:55:16.166 Downlink Activate received from VE3MIC Nothing appears in the Local RF A...

-SOLVED-

I updated the MMDVM firmware on the DUE, and it is now working!
Thanks everyone
73 de Mike

Hello Paul,

I have not been able to get the ZUM Modem + Due to be recognized. I am awaiting another power supply, as the one that i am currently using will supply just slightly more than 2 amps(2.4A). I will continue to post my progress (or lack of).
Thanks & 73
de Mike

Have tried sudo apt-get install --reinstall raspberrypi-kernel
it didn't fix the "Unable to read the firmware version after six attempts" error

While looking through the log files, I am seeing the following error> E: 2019-02-18 00:17:21.944 Unable to read the firmware version after six attempts

Has anyone else experienced this?

Thanks in advance
73 de Mike

Well that's interesting.. I ran an 'Upgrade' and the following message appeared>
Starting upgrade, please wait...
Detected Pi-Star 3.4.17 running on RPi hardware, attached to zum modem...

Thank you Andrew, I have never seen anything appear in the "Live Logs" other than 'Starting logging, please wait...' I may have to start with a new image...Already tried a factory reset, and that didn't help. Perhaps it is time for a new ZUM radio board -the one that connects via GPIO :) 7...