Search found 8 matches
- Sat May 09, 2020 6:34 am
- Forum: YSF Specific Support
- Topic: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network
- Replies: 10
- Views: 6891
Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network
Andy, I am having the problem with no audio when using YSF mode with Pi-Star 4.1.1. I am not using any of the YSF cross modes built into Pi-Star but I am connected to a YSF reflector with Pi-Star on my FT2D Yaesu radio. If the other station I am in QSO with is also on the same YSF reflector there is...
- Sun Jun 09, 2019 6:03 am
- Forum: ZUMSpot (Hat / Libre / USB)
- Topic: Firmware update problem
- Replies: 9
- Views: 12083
Re: Firmware update problem
I believe you have used the incorrect firmware for a true zumspot board. If indeed you have the official zumspot board then you use the command:
sudo pistar-zumspotflash rpi
I think you can just reflash the zumspot firmware with the correct one and it will fix your problem.
sudo pistar-zumspotflash rpi
I think you can just reflash the zumspot firmware with the correct one and it will fix your problem.
- Wed Jun 05, 2019 6:46 am
- Forum: Nextion Screens
- Topic: Nextion Driver not Loading
- Replies: 3
- Views: 12268
Re: Nextion Driver not Loading
Sometimes when installing the ON7LDS Nextion Driver, the driver file doesn't get installed into the "/dev" folder. Go back and follow the installation instructions again and download the driver file again into the "/tmp" folder and then run the 'check_installation' script and it ...
- Wed Oct 03, 2018 6:31 am
- Forum: Nextion Screens
- Topic: Problem Installing ON7LDS Nextion Driver
- Replies: 22
- Views: 20094
Re: Problem Installing ON7LDS Nextion Driver
Found this same problem. Goto folder path: /usr/local/bin You should there see the file: NextionDriver Copy this file to your /dev folder renaming the file using this command from the /usr/local/bin folder: sudo cp NextionDriver /dev/ttyNextionDriver Should then work and show up in your configuratio...
- Sun Jul 29, 2018 6:33 am
- Forum: WiFi Setup
- Topic: iPhone 6 to jumbospot
- Replies: 1
- Views: 2126
Re: iPhone 6 to jumbospot
Did you try to change the Iphone SSID name from the typical Apple id which looks like "Joe's Iphone" to something simple. Pi-Star doesn't like special characters.
- Tue Jun 26, 2018 6:18 am
- Forum: OLED Screens
- Topic: Increase display hang time?
- Replies: 3
- Views: 5605
Re: Increase display hang time?
The RF and NET mode timers on the configuration page control how long a mode remains locked on after the mode activity ends. This also affects the OLED display time.
- Sun May 27, 2018 5:52 am
- Forum: ZUMSpot (Hat / Libre / USB)
- Topic: Unable to access ZUMspot-RPi Zero W
- Replies: 5
- Views: 6560
Re: Unable to access ZUMspot-RPi Zero W
Try using the IP address of the Pi in the browser address field. If you do not know the Pi IP address download an IP address finder such as "Fing" for your wireless phone (Android or IOS) and let it search for all the IP addresses on your home network. Hopefully it will find the IP address...
- Sun May 13, 2018 5:44 am
- Forum: Nextion Screens
- Topic: RSSI Reading with Jumbospot
- Replies: 2
- Views: 2876
Re: RSSI Reading with Jumbospot
Did you check in the Pi-Star Expert -- Rssi Dat section to see if the Rssi values are there? If not, search the Pi-Star Facebook group for Rssi and you should find a list of the values to type in to make it work.