Search found 8 matches

by wb6dtb
Sat May 09, 2020 6:34 am
Forum: YSF Specific Support
Topic: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network
Replies: 10
Views: 6762

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Andy, I am having the problem with no audio when using YSF mode with Pi-Star 4.1.1. I am not using any of the YSF cross modes built into Pi-Star but I am connected to a YSF reflector with Pi-Star on my FT2D Yaesu radio. If the other station I am in QSO with is also on the same YSF reflector there is...
by wb6dtb
Sun Jun 09, 2019 6:03 am
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11856

Re: Firmware update problem

I believe you have used the incorrect firmware for a true zumspot board. If indeed you have the official zumspot board then you use the command:
sudo pistar-zumspotflash rpi
I think you can just reflash the zumspot firmware with the correct one and it will fix your problem.
by wb6dtb
Wed Jun 05, 2019 6:46 am
Forum: Nextion Screens
Topic: Nextion Driver not Loading
Replies: 3
Views: 12116

Re: Nextion Driver not Loading

Sometimes when installing the ON7LDS Nextion Driver, the driver file doesn't get installed into the "/dev" folder. Go back and follow the installation instructions again and download the driver file again into the "/tmp" folder and then run the 'check_installation' script and it ...
by wb6dtb
Wed Oct 03, 2018 6:31 am
Forum: Nextion Screens
Topic: Problem Installing ON7LDS Nextion Driver
Replies: 22
Views: 19945

Re: Problem Installing ON7LDS Nextion Driver

Found this same problem. Goto folder path: /usr/local/bin You should there see the file: NextionDriver Copy this file to your /dev folder renaming the file using this command from the /usr/local/bin folder: sudo cp NextionDriver /dev/ttyNextionDriver Should then work and show up in your configuratio...
by wb6dtb
Sun Jul 29, 2018 6:33 am
Forum: WiFi Setup
Topic: iPhone 6 to jumbospot
Replies: 1
Views: 2102

Re: iPhone 6 to jumbospot

Did you try to change the Iphone SSID name from the typical Apple id which looks like "Joe's Iphone" to something simple. Pi-Star doesn't like special characters.
by wb6dtb
Tue Jun 26, 2018 6:18 am
Forum: OLED Screens
Topic: Increase display hang time?
Replies: 3
Views: 5474

Re: Increase display hang time?

The RF and NET mode timers on the configuration page control how long a mode remains locked on after the mode activity ends. This also affects the OLED display time.
by wb6dtb
Sun May 27, 2018 5:52 am
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Unable to access ZUMspot-RPi Zero W
Replies: 5
Views: 6518

Re: Unable to access ZUMspot-RPi Zero W

Try using the IP address of the Pi in the browser address field. If you do not know the Pi IP address download an IP address finder such as "Fing" for your wireless phone (Android or IOS) and let it search for all the IP addresses on your home network. Hopefully it will find the IP address...
by wb6dtb
Sun May 13, 2018 5:44 am
Forum: Nextion Screens
Topic: RSSI Reading with Jumbospot
Replies: 2
Views: 2849

Re: RSSI Reading with Jumbospot

Did you check in the Pi-Star Expert -- Rssi Dat section to see if the Rssi values are there? If not, search the Pi-Star Facebook group for Rssi and you should find a list of the values to type in to make it work.