forum.pistar.uk

I think I've uncovered half of what the OP is reporting, I still don't know what error he is experiencing though. The overview of the pistar-mmdvmhshatflash script is that it downloads files from the MMDVM_HS github repo, one of those files is determined by which parameter you enter when executed a...

Simply the argument isn't worth the effort, I can't see the benefit of posting further as your obviously looking for some kind of engagement or hostile response. 1)1.5.2 drops after 29 seconds on multiple devices 1.4.17 fine. 2) pi 4 the script identifies pi 4 as pi 3 and fails flashing hat, same sd...

Having built 18 hotspots I have a number running kicad Duplex board and have had to update firmware as the pistar project evolves. Hat Firmware 1.5.2 cuts out at least on fusion after 29 secs approximately, 1.4.17 works well. The flashing issue is pi star identifying Pi4 as a pi3 which bulks up writ...

same issues, you can tinker with mmdvmhost settings

Hi yes the Argon script pulled a load of gpio updates and the hat took ages to connect green and changing anything caused it to drop out. Earlier version with argon script and then pi-star updated seems to work fine It was definitely the argon script installation and the updates it pulled caused iss...

Pi 4, pimoni heat sink case duplex hat, software aware fan & 3d printed case
7 inch touch with onscreen keyboard and a 3.2 nextion enhanced touch screen with modified globe 8 software

Hi thanks for the reply it's gpio issue now resolved by downgrade as a script for additional fan hat pulled a load of updates.

Thank you for suggestions

Knowing that a config error will give issues and I reverted to a previous kernel on another card and all behaves as expected I: 2020-08-30 22:49:55.879 TX Frequency: 438800000Hz (438799550Hz) M: 2020-08-30 22:49:55.879 Opening the MMDVM E: 2020-08-30 22:49:59.682 Error returned from write(), errno=5...

KE0FHS wrote: ↑Tue Jan 28, 2020 2:13 pmNicely done!

Thank you, small world- I read your comprehensive notes on your website- most useful.

you do not need a nextion port on radio as far as I am aware and using pi to drive screen
perhaps Cp2104 usb to uart
compiled nextion driver
/dev/ttyAMA0 running off usb

you can see my build by looking at my other posts and a video of it working off usb with touch screen