Search found 56 matches

by G4AON
Mon Aug 28, 2023 10:43 am
Forum: D-Star Specific Support
Topic: Connections taking a while to establish
Replies: 7
Views: 5922

Re: Connections taking a while to establish

Having carefully checked what is happening, the following seems to be the case with mine: If the Raspberry Pi is left running 24/7, it always connects to a reflector. However, the automatic update each morning sometimes results in a delay of up to an hour before the Pi is reconnected to a reflector....
by G4AON
Sun Aug 20, 2023 12:05 pm
Forum: D-Star Specific Support
Topic: Connections taking a while to establish
Replies: 7
Views: 5922

Re: Connections taking a while to establish

I have the same issue on a DVAP (Pi 3B) and an MMDVM board on another Pi 3B. One is used via a phone hotspot and the other is wired to a router. I have a third using a Pi Zero W in a slim aluminium case, but that restricts the WiFi performance and is rarely used. My “workaround” is to leave the hard...
by G4AON
Thu Apr 06, 2023 6:56 am
Forum: Pi-Star General Support
Topic: M1ABC call on dashboard after update
Replies: 6
Views: 1460

Re: M1ABC call on dashboard after update

Update... A little midnight oil later, did a backup. Formatted the card and re-installed a fresh image, restored from backup.

Problem solved and the backup even restored my colour scheme. Quite painless and quick.

73 Dave
by G4AON
Wed Apr 05, 2023 10:49 pm
Forum: Pi-Star General Support
Topic: M1ABC call on dashboard after update
Replies: 6
Views: 1460

Re: M1ABC call on dashboard after update

The fetch-head problem might need a little more doing to fix... From the CLI type cd /usr/local/bin sudo git stash sudo git pull Sent via smoke signals from my SM-G935F M1DNS (Admin) Tried that, unfortunately without success. It still returns the following afterwards when I run "update": ...
by G4AON
Wed Apr 05, 2023 9:34 am
Forum: Pi-Star General Support
Topic: M1ABC call on dashboard after update
Replies: 6
Views: 1460

M1ABC call on dashboard after update

When running an update, one of my Pi-Star boards reverts back to M1ABC as the call. I note there is an error when updating and it looks like something may be set to read only preventing changes. This is what is displayed when running the update: ----- Starting update, please wait... Stopping Service...
by G4AON
Sun Mar 19, 2023 11:39 am
Forum: OLED Screens
Topic: Colour OLED screen
Replies: 2
Views: 4240

Re: Colour OLED screen

I don’t know if two colours will suffice, the small yellow and blue 0.96” OLED screens work fine with a standard MMDVM board. I recently fitted one from an eBay supplier, eBay item number 134204262304

It has the correct order of connections and spacing to fit straight onto the MMDVM board.

73 Dave
by G4AON
Sun Mar 19, 2023 11:14 am
Forum: MMDVM_HS Hat(s)
Topic: TX output
Replies: 4
Views: 4879

Re: TX output

I have three “hotspots”, two are MMDVM boards and the other is a 2m DVAP dongle. They all produce between 10 and 12mW output, as measured with a Rigol spectrum analyser and attenuator. This is the specification of the IC used in the boards. The maximum range I can “ping” one of the 70 cm MMDVM units...
by G4AON
Sat Mar 04, 2023 4:13 pm
Forum: Pi-Star General Support
Topic: Hotspot with built-in SIM - does one exist?
Replies: 1
Views: 556

Re: Hotspot with built-in SIM - does one exist?

Assuming your mobile provider doesn’t block tethering, a Pi-Star hotspot will work without issues. I have 3 “Pies”, a Pi Zero W with Chinese MMDVM, a 3B also with Chinese MMDVM and another 3B with a red coloured DVAP. All work via my iPhone SE (2020). They also worked with my earlier iPhone SE and i...
by G4AON
Fri Mar 03, 2023 11:44 am
Forum: D-Star Specific Support
Topic: Over modulation?
Replies: 0
Views: 5914

Over modulation?

I'm not certain, but it sounds like some "loud" stations break up with a "beep" while otherwise being a good signal. This seens to be more of an issue with an MMDVM board than a DVAP dongle. In the MMDVM config (Expert, Edit MMDVM Host), there are several level settings that by d...
by G4AON
Fri Mar 03, 2023 11:18 am
Forum: Pi-Star General Support
Topic: How to autologin to dashboard
Replies: 3
Views: 932

Re: How to autologin to dashboard

Eric, many thanks for posting that. I recently configured a 3rd Pi-Star and couldn't find anywhere showing the hack, I have previously removed the log-on from my other two Pies but misplaced where I had saved the info.

73 Dave