forum.pistar.uk

Thanks for all the theorizing and the potential solutions. Turned out the problem was most likely a corrupted configuration and a too small SD card. I am not sure if that is what actually drove the failure, but all is in balance now. Interesting observation: I could not get the latest image (5/28) a...

Of several hotspots, I have one mmdvm_hs hat - acquired second hand. Worked fine for quite a while (year or so). Pwr was always from a UPS and the unit was usually on unless exercising lightning precautions and I shut the entire station down. Fail occurred last week - it went deaf and dumb and the O...

All, A resolution happened: Thanks for the comments all. I had done exactly as Toshen, John Hays, and others suggested in setting up the D74 and it would not do an outbound transmit on DCS102 only... very weird! Others could see me keying up but no audio transmitted. Regardless - the 7100 worked so ...

I ran into an interesting problem today while trying to use reflector DCS102B with my TH D74. I could not raise anyone on the other DCS reflector (006A) that I have configured to confirm that this problem effects any other DCS reflectors. Using a DVMEGA as hotspot I see the following: I issue UR = D...

Been swamped with work and a few critical projects so just read your reply! Sooo far behind... What I am trying to do is create a "D-Star modem device" that connects to the high speed modem port of an IC-7000. The purpose is to use the AMBE encoder/GMSK modem/separate mic and speaker to encode and d...

I tried to update my single band DVMEGA hat using Pistar in SSH mode. I made the strap mod that is described in Guus' instructions with the firmware, then followed the instructions on: "http://wiki.pistar.uk/Flash_your_DV-Mega_from_Pi-Star" I have had a repeated failure at the point where the script...

Thanks Andrew, Aware of the D-Star only bit. I am not much of a DMR user and don't have C4FM at all - my emphasis is really on non-voice digital modes and HF (including D-Star). I have been in conversation with Guus sporadically about the idea. He indicated that he had planned to work on it a while ...

:shock: Just starting to play with this. Looks like it is particularly for repeater/hotspot use. Was hoping that using Guus’ GMSK and AMBE 3000 shields together on an Arduino Mega board would get me to a local combo that would do the work of the MOENcomm *board for HF and up. If anyone has tried it ...