Search found 16 matches
- Fri Jul 29, 2022 8:43 pm
- Forum: D-Star Specific Support
- Topic: RP2C gateway bug
- Replies: 0
- Views: 3153
RP2C gateway bug
When you use Pi Star as a gateway for an ICOM "stack" it is not necessary to have two ethernet ports. You can just program the RP2C to be on your local network (ex. 192.168.1.x) and use the one port on the RPI. Pi Star's ircDDB will, however, try to "help" you by automatically ch...
- Sat Mar 27, 2021 2:26 am
- Forum: Pi-Star General Support
- Topic: 23 cm frequency displayed incorrectly
- Replies: 0
- Views: 1428
23 cm frequency displayed incorrectly
I can enter the actual operating frequency ok (for example) 1286200000
but what gets displayed in the dashboard radio info is 128.620000 MHz
this is version 4.1.4
Ken
but what gets displayed in the dashboard radio info is 128.620000 MHz
this is version 4.1.4
Ken
- Mon Jun 08, 2020 4:00 pm
- Forum: D-Star Specific Support
- Topic: the DCS poll
- Replies: 2
- Views: 1525
Re: the DCS poll
Wow - there must be a lot of these, if that is the cause, I am surprised I am the only one posting about it. DCS006 and XLX006 have different addresses. When i ask for XLX I get DCS instead and that is a different IP. And I get those poll errors. Let's pick a different reflector. If I select XLX287 ...
- Mon Jun 08, 2020 2:14 am
- Forum: Pi-Star General Support
- Topic: uPNP magic?
- Replies: 8
- Views: 3176
Re: uPNP magic?
Yes - OK I understand.
Consider however, that the weeny NanoPi is running at 0.4 CPU load and the RPI 3B at 0.08. Whereas the feature to turn off the Gateway exists only on the latter one
Ken
Consider however, that the weeny NanoPi is running at 0.4 CPU load and the RPI 3B at 0.08. Whereas the feature to turn off the Gateway exists only on the latter one
Ken
- Sun Jun 07, 2020 10:49 pm
- Forum: D-Star Specific Support
- Topic: the DCS poll
- Replies: 2
- Views: 1525
the DCS poll
I have been running two pi-star repeaters here for a while now and they are generally satisfactory except for DCS which has never worked right on either machine. This goes for XLX too, where the connection made is a DCS connection. It seems to connect but then I get the connected message every two m...
- Thu May 28, 2020 3:07 pm
- Forum: Pi-Star General Support
- Topic: uPNP magic?
- Replies: 8
- Views: 3176
Re: uPNP magic?
correction: it's a "FriendlyARM NanoPi NEO" seems to look like this one http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO This Pi flavour is being supplied in the Repeater-Builder implementation of the ks-dmr MTR2000 board Here is the original article http://ks-dmr.net/2019/04/11/intro...
- Thu May 28, 2020 3:20 am
- Forum: Pi-Star General Support
- Topic: uPNP magic?
- Replies: 8
- Views: 3176
Re: uPNP magic?
Thanks! exactly what I needed to know. but I had some problems. It seems that the uPNP feature in 4.1.2 did not work. I turned off the other repeater, manually deleted the ports in the router and then tried, in various combinations, rebooting the router, rebooting the pi-star and de-selecting / re-s...
- Wed May 27, 2020 8:48 pm
- Forum: Pi-Star General Support
- Topic: uPNP magic?
- Replies: 8
- Views: 3176
Re: uPNP magic?
you wrote "That's a good idea, so its now automatic, if you are using a gateway address of anything other than the local host (127.0.0.1), ircDDBGateway cannot start." what version first incorporated that change? Do I need to update my 3.4.17? Thanks and to be clear - the referenced gatewa...
- Wed May 27, 2020 3:31 pm
- Forum: Pi-Star General Support
- Topic: uPNP magic?
- Replies: 8
- Views: 3176
uPNP magic?
I have two pi-star installs: one ver 3.4.17 and one 4.1.2. They are both behind the same router. They both have uPNP enabled. My router shows the full complement of IGD ports open only to the first pi-star. But both pi-stars can link to REF reflectors and both show that their in-built ircDDB gateway...
- Mon May 25, 2020 7:46 pm
- Forum: D-Star Specific Support
- Topic: gateway dashboard for ID-RP2C
- Replies: 3
- Views: 2558
Re: gateway dashboard for ID-RP2C
OK - So far 100% with this forum: I have never got an answer to any question posted. In this case, I eventually figured out my error: when using ID-RP2C you need to select a configuration of Repeater rather then mmdvm modem. And then you need to select a radio/modem type of ID-RP2C and power cycle t...