Search found 51 matches

by G0FHM
Thu Feb 22, 2024 11:18 am
Forum: MMDVM_HS Hat(s)
Topic: Cannot get the control attributes
Replies: 6
Views: 736

Re: Cannot get the control attributes

With 4.3.0 I have the problem every single time I reboot! I've set up a cron job to deal with it. @reboot sleep 35 && rpi-rw @reboot sleep 40 && sudo rm /dev/ttyAMA0 @reboot sleep 45 && sudo mknod /dev/ttyAMA0 c 204 64 @reboot sleep 50 && sudo chown root:dialout /dev/...
by G0FHM
Mon Feb 19, 2024 11:07 am
Forum: Pi-Star General Support
Topic: v4.2.0 Dashboard Failing
Replies: 8
Views: 477

Re: v4.2.0 Dashboard Failing

If you could, that would be good. I've left it "as is" for the time being, as now the dashboard is showing no DMR or YSF services running, and none of the pi-star logs are accessible. I think the services thing may be related to the paralell port permissions thing that I saw on here in a d...
by G0FHM
Sun Feb 18, 2024 6:04 pm
Forum: Pi-Star General Support
Topic: v4.2.0 Dashboard Failing
Replies: 8
Views: 477

Re: v4.2.0 Dashboard Failing

PS,

If you want to dive in via SSH and have a poke around, I can always supply IP and password if you DM me

J
by G0FHM
Sun Feb 18, 2024 6:02 pm
Forum: Pi-Star General Support
Topic: v4.2.0 Dashboard Failing
Replies: 8
Views: 477

Re: v4.2.0 Dashboard Failing

I've just upgraded to v4.3.0 (fresh install on 32GB SD) with full updates and FS expanded and have run in to the same problem. I wonder if it is due to a capacity issue? I've tried to make a backup copy of the mmdvmhost logfile in /var/log/pi-star folder, and get the error that there is no free spac...
by G0FHM
Sun Feb 18, 2024 12:02 pm
Forum: Pi-Star General Support
Topic: v4.2.0 Dashboard Failing
Replies: 8
Views: 477

Re: v4.2.0 Dashboard Failing

Hi Andy, The dashboard is stuck at 22.27h on 17/02 I can read the MMDVM log for 17/02 in it's entirety, but reading the log dated 18/02 gives an error. Below is the output for the latter half o 2024-02-17 22:26:51.319 YSF, received network data from MW0HMV to DG-ID 0 at FCS235-89 M: 2024-02-17 22:26...
by G0FHM
Tue Feb 13, 2024 2:33 pm
Forum: Pi-Star General Support
Topic: v4.2.0 Dashboard Failing
Replies: 8
Views: 477

v4.2.0 Dashboard Failing

Hi all, I'm having issues with the dashboard regularly dropping out since the upgrade to 4.2.0 in as much as when you go to check it, it has frozen at some prior point in time, with the last inbound transmission showing infinity and no subsequent Net/RF data being displayed. I've seen it at odd time...
by G0FHM
Mon Dec 18, 2023 7:01 pm
Forum: DMR Specific Support
Topic: TGRewrites
Replies: 1
Views: 8892

TGRewrites

Guys, i need to rewrite a T2 Talkgroup to move the same TG on slot 1. I've been playing about a bit but nothing happened!

Advice please!
by G0FHM
Tue Sep 12, 2023 3:28 pm
Forum: Software Support
Topic: POCSAG - Send message at given CPU temp...
Replies: 0
Views: 27928

POCSAG - Send message at given CPU temp...

Hi All, I know what I want to achieve but have no idea how to implement it, so am looking for help! I want to implement a system monitor script to periodically check the CPU temperature, and if it should be equal to or greater than a given figure, to send a POGSAG message using RemoteCommand. Using ...
by G0FHM
Sat Jun 10, 2023 8:29 am
Forum: DMR Specific Support
Topic: RF Hangtime, DMR (Repeater)
Replies: 2
Views: 5398

RF Hangtime, DMR (Repeater)

Hi folks, I'm running a repeater with a Winters board and a pair of Kenwood TK-8180. The problem I have is with the RF hangtime. The TK-8180 has a 10 minute (max) TOT and during heavy incoming net traffic, the TX radio will time out and not come back in until the TX drops and it resets. What I want ...
by G0FHM
Mon Oct 10, 2022 3:03 pm
Forum: Everything Else
Topic: Connecting All Star reflector to DMR?
Replies: 2
Views: 12476

Re: Connecting All Star reflector to DMR?

Thanks Andrew.

I don't want to link to any other DMR network, just have it linked locally to TG9 on my repeater. I know other networks are a bit twitchy about other things linking, hence my desire to keep it local!

Thanks,

J