forum.pistar.uk

Hi Dan,
tried hours to get it to run, but no luck.
how to install the .deb file?
pi-star@pi-star(ro):log$ cat daemon.log |grep SMTP
Nov 1 13:28:59 pi-star dapgw2email.py[1444]: Error: Check SMTP configuration.
but running email citadel server working ok and accepting testmails

need example docu ...

Hi,
Is there a way to log incoming messages into a local file?
the log file should restart every day.
73 Hans

I found log file is already there:
/var/log/pi-star/POCSAGGateway-2020-MM-DD.log

did sudo pistar-mmdvmcall
F 433450000
b pushing PTT on TYT QRG simplex 433.45
BER Test Mode (FEC) for DMR Simplex
DMR audio seq. 5, FEC BER % (errs): 9.929% (14/141)
one time only I did see the strange upper line
pushing again PTT no reaction

finaly it seem to work: correction -2750
is this ...

did solder the extra socket: flash now worked
new problem: no DMR communication to and from TYT handheld . Stations on the Tableau are visible
Maybe I ned a frequency correction?

thanks a lot for your help! I attach a photo of the board
I have a ST-Link V2
Are these 4 wires in the upper row marked with ST-Link?
o 3V o DIO o CLK o GND

i did
sudo pistar-mmdvmhshatflash hs_hat
......

Raspberry Pi 2 or Pi Zero W detected
stm32flash Arduino_STM32_0.9
http://github.com/rogerclarkmelbourne/arduino_stm32
Using Parser : Raw BINARY
Interface serial_posix: 57600 8E1
Failed to init device.

thanks for reply!
is this so correct now:
pi-star@pi-star(ro):~$ sudo pistar-mmdvmhshatflash
This tool is used to flash your MMDVM_HS Hat Modem
to use the command, you will need to pass the name of your modem,
please choose form the list below...

To flash HS_HAT (14.7456MHz TCXO) connected to GPIO ...

Hi to all,
I hope to get help here:
Hardware: china MMDVM_HS:021 v1.0 (bought 2018)
Software: pi-star ver 3.4.17
did try to update firmware: because POCSAG does not transmit, DMR Hotspot working ok

sudo pistar-mmdvmhshatflash
...
Selected Modem: STM32-DVM / MMDVM_HS - Raspberry Pi Hat (GPIO ...