Still nothing,
It must be very difficult to perform this.
Andy should ask for help to make this change.
Search found 8 matches
- Thu Feb 20, 2020 7:27 pm
- Forum: Pi-Star General Support
- Topic: The OPenGD77 Hotspot identity has changed
- Replies: 3
- Views: 2076
- Mon Feb 03, 2020 6:49 pm
- Forum: Pi-Star General Support
- Topic: The OPenGD77 Hotspot identity has changed
- Replies: 3
- Views: 2076
Re: The OPenGD77 Hotspot identity has changed
PR sent since early January, but nothing is happening
- Mon Jan 20, 2020 7:22 pm
- Forum: Radio Equipment
- Topic: Recommended Radios For Use On PI-Star
- Replies: 10
- Views: 19890
Re: Recommended Radios For Use On PI-Star
I use 3 GD-77 (with OpenGD77 firmware) + with simplex (PI0), dual (PI3) and even one of my GD77 in HotSpot (DMR). It works very well.
.
. 73 de Thierry
.
. 73 de Thierry
- Fri Dec 21, 2018 12:21 pm
- Forum: MMDVM_HS Hat(s)
- Topic: FW 1.4.14 breaks my duplex hat
- Replies: 5
- Views: 5099
Re: FW 1.4.14 breaks my duplex hat
I already had these problems after an update, now I use these lines of code on (to use under "ssh") : rpi-rw cd ~ curl -OL https://raw.github.com/juribeparada/MMDVM_HS/master/scripts/install_fw_hshat.sh sudo chmod +x install_fw_hshat.sh sudo pistar-watchdog.service stop; sudo systemctl sto...
- Sun Sep 09, 2018 1:37 pm
- Forum: MMDVM_HS Hat(s)
- Topic: No RF after firmware upgrade
- Replies: 5
- Views: 4923
Re: No RF after firmware upgrade
Thank you for your post, i have the same problem (no RF after firmware update) and with -4000 for RX and TX offset, the board is ok again !!!! (I adjust at -4200 to have TX BER error near zero) (Edit : My hotspot is not a "S56AL" but a "BG3MDO", but same problem....) 73's Thierry...
- Wed Aug 08, 2018 11:49 am
- Forum: Nextion Screens
- Topic: 2.4 inch Nexion Display
- Replies: 7
- Views: 5964
Re: 2.4 inch Nexion Display
Every time you change your wiring or ouput display port, you must reboot the PI Hotspot...
73 F1CXG
73 F1CXG
- Wed Aug 01, 2018 3:17 pm
- Forum: Nextion Screens
- Topic: 2.4 inch Nexion Display
- Replies: 7
- Views: 5964
Re: 2.4 inch Nexion Display
When my Nextion is wired on my jumbospot I choose "Modem" for the output port instead "/dev/ttyAMAO"
(Now i use USB port, it's more easy !!!, not necessary to open the box)
73 de F1CXG
(Now i use USB port, it's more easy !!!, not necessary to open the box)
73 de F1CXG
- Mon Jul 30, 2018 8:08 am
- Forum: Nextion Screens
- Topic: Nextion question
- Replies: 3
- Views: 3459
Re: Nextion question
Hello, I use a Nextion display (2,4") with my Jumbospot. I use the second USB plug of the Pi Zero board( with a short cable micro-USB/USB) and a USB to TTL converter between Pi and Nextion screen. (just need to swap Rx & Tx wires at the output of the TTL converter !!!) https://zupimages.net...