Search found 89 matches

by W1KMC
Fri Sep 07, 2018 5:40 pm
Forum: Raspberry Pi Foundation Hardware
Topic: will not connect to wifi but AP is working and I can connect to the AP
Replies: 2
Views: 675

Re: will not connect to wifi but AP is working and I can connect to the AP

Not that it would make a whole lot of difference,but maybe when the 'bad' Pi0 went to renew its IP lease something went horribly wrong and a lease could not be obtained, shutting off for a day may have released the IP lease and gave a new IP instead. If your router can do 'RESERVE" IP tables set eac...
by W1KMC
Wed Sep 05, 2018 5:02 pm
Forum: Feature Requests
Topic: UTC as a timezone
Replies: 3
Views: 569

Re: UTC as a timezone

With a little googling I found this: https://en.wikipedia.org/wiki/List_of_UTC_time_offsets

You can use Europe/Spain as a sub for UTC as Europe/London shifts in DST +1 in summer)
by W1KMC
Wed Aug 29, 2018 2:15 am
Forum: MMDVM_HS Hat(s)
Topic: SOLVED - pistar remote commands RF - was hardware button to shut down
Replies: 7
Views: 4029

Re: hardware button to shut down

OK fols - there is a 'glitch' somewhere: My Pi-Star is set correctly with the Remote (my Callsign is the only one that will shut the device down) and Shutdown uncommented, BUT a Private Call to the shutdown code of 9999996 gets sent and in 5 seconds or so "Secret Not Found" is heard on TG 9 (I think...
by W1KMC
Wed Aug 29, 2018 2:01 am
Forum: Pi-Star General Support
Topic: Cant do pi-star link except on phone wifi
Replies: 6
Views: 1402

Re: Cant do pi-star link except on phone wifi

Somewhere in the sprint Hotspot menus is a selection similar to 'Connected Devices' If your Zumspot is connected to the Sprint device thiat is where you need to look, if it only giives a MAC address then something went wrong. Anyone else out there with a Sprint Hotspot that can give us a hand? Somet...
by W1KMC
Mon Aug 27, 2018 9:51 pm
Forum: Pi-Star General Support
Topic: Help!!
Replies: 1
Views: 294

Re: Help!!

I would do this for you but the process would disconnect me from you. I have anwered this a few times (slightly different depending on post) but from scratch, I cannot find one to point you to, so here we go. If you have a desktop or laptop this will be a bit easier: search for a WiFi network called...
by W1KMC
Mon Aug 27, 2018 9:15 pm
Forum: DMR Specific Support
Topic: Something is wrong...
Replies: 1
Views: 565

Re: Something is wrong...

Yep, not a public mode hotspot and you are using a different DMR ID from configuration. http://pi-star/ Configuration if asked --- pi-star // raspberry just under your modem selection is a field called Node Type field for what type of access to the hotspot you want --- Yourself Only (Private (my gue...
by W1KMC
Sun Aug 26, 2018 12:46 pm
Forum: Pi-Star General Support
Topic: Cant do pi-star link except on phone wifi
Replies: 6
Views: 1402

Re: Cant do pi-star link except on phone wifi

I am no developer, guru, expert, nor do I claim to be or want to be. All advice I give is purely from experience and my efforts to help others, take my advice/suggestions as you deem fit. I help when I can but make absolutely no guarantees what worked for me will work for you. Doug, what you describ...
by W1KMC
Sat Aug 25, 2018 6:12 pm
Forum: DMR Specific Support
Topic: DMR2YSF is it working ?
Replies: 7
Views: 1769

Re: DMR2YSF is it working ?

I understand your pain, which is WHY I use DMR2NXDN instead , here you prefix the NXDN TalkGroup with 7 e.g 765000 or 701200 (must be 5 digits).

You want to move around to different YSF rooms? you need a true YSF radio. Sorry, but that's the way it is ....right now anyways.
by W1KMC
Sat Aug 25, 2018 2:11 pm
Forum: DMR Specific Support
Topic: DMR2YSF is it working ?
Replies: 7
Views: 1769

Re: DMR2YSF is it working ?

No, this is normal as DMR2YSF does not disconnect simply because you changed back to TG9, the DMR2YSF is on until you turn off the mode, and since you cannot change rooms on the fly, if you pick a busy room (like the CQ-UK YSF reflector your pi-star will always go back to it whenever there is activi...
by W1KMC
Wed Aug 22, 2018 5:42 pm
Forum: Pi-Star General Support
Topic: RPi Images Repository
Replies: 4
Views: 615

Re: RPi Images Repository

I save everything I DL, I have Pi-Star_RPi_V3.4.11_17-Mar-2018.zip

PM an email address or I can put it up on my OWN file repo, for a few days so you can grab it. Some email providers limit attachment sizesZIP file is 558MB, maybe too large so let me know how you want it.