forum.pistar.uk

Since it's a false positive, go into the controller, and under Threat Management you can edit the whitelist. Whitelist the following and it should stop. Name: rr.openquad.net Address: 167.71.182.245 Name: rr.openquad.net Address: 140.82.6.227 Name: rr.openquad.net Address: 107.191.121.105 Name: rr.o...

Interesting. Drop to SSH and run this to see if you can catch what PID/Program it's coming from. sudo -s while `true`; do netstat -anp | grep 9007; sleep 1; done You shouldn't see any output unless it catches the connection. Control-C to break. Edit: BTW, that destination IP is one of the openquad I...

I'd honestly never noticed that... I don't use P25 that much myself... I'll bring it up with Jonathan and see if he's prepared to change the way the announcements are done. TGIF doesn't provide announcements on 4000 with unlink, which also throw YSF2DMR off since it waits for it. In fact, the conce...

Fantastic feature. I have a problem with it, Radio is a FTM100D Using YSF2P25 on the Pi-Star, Ysfgateway is patched with WiresXCommandPassthrough=1 and WiresXMakeUpper=1 I place the radio in Wirex by pressing the Dx button then pressing with a long press of the Band button This opens the selection ...

It seems to be a bit flakey. See the log below. Notice the initial connection to TG 103 went through YSF2DMR fine. However, hanging then over to TG 101, it treated it like it was a FCS reflector. Same with the next two tries to TG 102 and even back to TG 103 again. I'm testing from an FTM-100D. I've...

Andy,

I added a link to pull TGList_TGIF if you want to update to add it when users select TGIF.

http://tgif.network/tglist.php

K5MRE

There is no Network 4 and Network 5. What you're reading about is a fork that hasn't been merged in with the mainline code, or a pull request submitted to start that process. So if you're going to cry about TGIF getting added, and whine about being added to Network 3, don't enable it. You're not &qu...

You're welcome.

And for full credit, I think someone on here posted the hex values needed to be pushed by the i2cbus. Without that, I wouldn't have been able to add it to the source. So thanks to them, really.

The current kernel doesn’t boot it. I wouldn’t mind seeing it as well. Bit of overkill though unless you’re going to add more stuff.

Does any one know of a way to connect to a Wires-X room (#28952 Kansas City Ks link ) that doesn't have a hotspot connected to it, other than buying more equipment? Like the Wires-X HRD-2 and a FTM-100 ... If they aren't bridging to a YSF or FCS room, then you can't connect to it without an actual ...