forum.pistar.uk

Check out this thread:

https://github.com/g4klx/YSFClients/iss ... -827222029

Seems there is a software problem with the current YSFReflector software.

Hope that helps,

-Jeff, K9JTV

I have a Nextion NX4832K035_011 screen. I copied NX4832K035.tft file downloaded from https://github.com/g4klx/MMDVMHost/tree/master/Nextion_G4KLX to a SD card, then put it in the Nextion. It indicated it copied/installed the file with no issues. I power the Nextion down, remove the SD card, and powe...

I would be interested in the pdf also. I just got my reflector set up and am trying to bridge between a Zumspot and an HRI-200. I set up the tx/rx offset between the two but nothing coming across either. I'm sure I'm missing something.

-Jeff

Problem solved. I did a factory reset on the Hotspot and left all the defaults and all of a sudden everything started working. Sort of surprised since the default Hotspot name is UNITE-507C. Thought the dash might cause problems with the JumboSpot.

-Jeff

Hi Jeff, does the name of your Netgear WiFi network have any spaces in it? That can cause connection problems. No, I changed the Netgear SSID to my call sign, K9JTV. BTDT with my iPhone. Actually I had read about spaces and punctuation marks causing problems, so before I tried connecting my JumboSp...

I recently obtained a Netgear 770S Mobile Hotspot to run my JumboSpot off of in my car. The JumboSpot will connect via WiFi to my home router and my iPhone, but will not connect to the Netgear Mobile Hotspot. It has connected a couple of times (shows up on the Hotspot screen), but the IP address iss...

Jeff- I am experiencing a similar problem with my raspberry Pi. Did you make any progress with yours? Yes, I figured out that my D-Link Wireless Access Point that I was connecting my JumboSpots to was down. It had went bad and since it was a secondary WiFi Access Point, and the JumboSpots were the ...

I have been running three JumboSpots connected to my WiFi for months now, with no issues. I hadn't connected to them for a couple of weeks and was surprised a couple of days ago to find they were not working. Checked my router and no connections from any of them. Remembered the last time I did conne...

My DMR Radio (Radioddity GD-77) typically runs 0-.3 BER and my Yaesu FT-991A runs less than 1.0 BER, but my Yaesu FT-70DR will run 3-4 BER.

-Jeff

New firmware for the MMDVM_HS_Hat has been released. You can upgrade by entering the following in "Expert", "SSH Access": sudo pistar-mmdvmhshatflash hs_hat I am running three Jumbo Spots. One of them upgraded fine the first time (running YSF). The other two had to have the upgra...