forum.pistar.uk

With the dropping of the UK BrandMeister, I have changed the settings to use Ireland and checked the password is set too. I can change static talkgroups through the BM Manager and it is shown on the BM web page for my call, however I don't seem able to put a call out, nor do dynamic talkgroups appea...

Depends on the mode used. As above Mostly server, except Dstar. if you use the -------E (seven spaces and an E it records locally using ircddbgateway. If you connect to echo reflectors like the Z module of an XLX reflector it gets recorded via the reflector. That’s useful to know Andrew. Have you a...

You are trying to compare apples to oranges. The entire pathway from your hotspot to a reflector might be completely different than the pathway from your hotspot to the echo test. <SNIP> No, it is not recorded on the hotspot. It comes directly from a server. It just replays whatever it received. Th...

When I’ve had reports of poor/broken signals from my own transmission on a reflector, an echo test works OK.

Is the echo test recorded in Pi-Star, or does it test further back in the system?

Thanks

Dave

AK7AN wrote: ↑Wed Feb 19, 2020 8:43 pm Just select "text entry". Then you can type in whatever XLX### you would like.

Thanks for the reminder. It was just that there are XLX reflectors listed on the admin page, but absent from the drop down list on the config page.

73 Dave

I’m running 4.1.0-RC8 with a DVAP dongle.

I can select XLX reflectors from the admin page, but not from the config page where you select a reflector at startup.

I don’t know what difference, if any, there is between DCS and XLX reflectors. So the above differences may be irrelevant.

73 Dave

You could use an IP scanner to find what is connected to your phone, use a Windows PC or laptop running a free utility, such as:
https://www.advanced-ip-scanner.com/

Works a treat.

73 Dave

You can also change the colours too. Mine on 70cms DMR has a green background to the web page, one occasionally used with a 2m DVAP dongle is blue...

73 Dave

Lee, it sounds like your 380 is set to “promiscuous”. It should only receive the talkgroup selected on the radio, regardless of what is configured on the Pi-Star. Assuming you have no static groups configured, send 4000 (usually one of buttons on the radio is programmed to bring it up on screen), th...

It has been reported there are a lot of dodgy USB memory sticks around, the same issues may apply to claimed “genuine” SD cards. I have had no problems with SanDisk Ultra Class 10 cards from Amazon (Amazon stock, not from their 3rd party sellers). I use the Win32 Disk Image program, originally recom...