forum.pistar.uk

I noticed that my DVAP had stopped responding a few times this morning and did a couple of reboots. When the problem persisted, I checked to see if dstarrepeaterd was running. It was not. So I did a restart of the process. The problem reoccured rather quickly. From the systemd journal: Jul 02 09:44:...

Andy, if you're going to integrate Qnet Gateway, think about IPv6. The newest Qnet Gateway code supports full IPv6 connectivity.

This would be a tremendous feature.

I can confirm that there is an issue with one way audio when using the XLX connection feature. Another operator connected, I could hear him fine, but he could not hear me. Note: When I stated things were working in my earlier post I had not verified two way audio, just that I saw the connection on t...

Thank you Andy, I can confirm that it works. However, I see that the connection is being made via DPlus. This is probably because I have checked off use DPLus for XRF connections to get around any firewall issues. What I think would be better is if XLX connection requests try DCS first, as all xlxd ...

Kenwood has released firmware 1.09 for the D74 which includes reflector menu support for directly connecting to XLX reflectors. This request now takes on added urgency, as connect requests via XLX on a D74A fail.

It is still there.

http://www.dutch-star.eu/software/downl ... tup107.zip

I'm running RC4 and using DMR Gateway. Just for kicks, I thought I'd try to connect to my XLX reflector using DMR DMO mode. I have verified that the reflector is listening on port 8880 and that it is open in the firewall. My first attempt failed and I noticed that packets were not hitting the server...

Ramesh: I compared your config to mine and you are configured properly as far as I can tell, with the following caveats: I am running RC4. My node that talks to the remote ircddbgateway is using MMDVM rather than dstarrepeater. So the next thing to look at is firewall rules between the two hosts. On...

The current codebase of ircddbgateway seems to have merged support for direct connection to XLX reflectors. So rather than fudge a local entry for an XRF or DCS, we could directly connect via something like XLX020AL. Even the DV4mini (gasp!) now supports this, using DCS protocol when a D-Star connec...

It is a nice feature.