forum.pistar.uk

Version 1.0 has been released. Use of email via smtpauth over SSL on port 465 is now supported.

https://github.com/K2IE/dapgw2email/releases/tag/1.0

I see a lot of misinformation posted here and in other places about how to connect to an XLX reflector using Pi-Star. I have seen threads from otherwise knowledgable folks claiming you must use an XRF or DCS connect string to connect to an XLX reflector. This is plain wrong. You can connect to an XL...

Is SMTP in the /etc/dapgw2email.conf file set?

Eg. SMTP = 1.2.3.4

Radio must be in DN mode. Wide won't work with YSF reflectors.

If it is truly an XLX you don't need to edit anything. Just access it via the XLX name using your radio. Unless you MUST do it via DTMF.

rpi-rw
sudo apt-get update
sudo apt-get install tcpdump

You'll need to capture your data with tcpdump and then move it over to another machine running Wireshark. Since you've asked the question I'll assume you know what you're doing here...

73

There is just no reason to have to do this nor is this how I do it on my native Naylor code installation of ircddbgateway. On the native installation, in the ircddbgateway config I set: reflector1=XLX020 A atStartup1=1 xlxEnabled=1 xlxHostsFileUrl=http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster Then...

This is a FAQ.

There is no protocol translation in Pi-Star to or from D-Star. This would require additional hardware that is not part of the supported MMDVM devices.

73

Here is what I use for TGIF Prime with HBlink:

StartRef0=nnnnn;StartRef1=nnnnn

0 would be on TS1, 1 would be on TS2.

73

The power range for the DVAP is -10 to +10.