forum.pistar.uk

Yes you can override the restriction, however you will need to compile the firmware yourself. Now before you say "but I can't do that!" the process is not that difficult and there is a step by step instruction that you can copy and paste all the commands. This is located on the following u...

The main mistake people make when setting up a dstar radio for use with pistar is that you must treat it like a repeater, BUT you use a 0.00 duplex offset. Without doing so you will have the exact problem you have described! So instead of importing the very out of date repeater listing for importing...

Firstly is your club website running over https? If so you can't place a http iframe within secured (https) content. So you can't have a mixture of http/https as this was considered a security risk several years ago. So you'll need to either implement https on your pistar systems (something that has...

You will need to update the firmware of your controller to be at least 20200520 (think that's the format used) otherwise it will not work as intended.

Cheers

Sent from my Pixel 4 XL using Tapatalk

Make sure you have disabled AMS on the frequency, otherwise you will get some data received as FM instead of C4FM.

Cheers

Sent from my Pixel 4 XL using Tapatalk

You need to edit the file dhcpcd.conf this is located in /etc The format is as follows... Interface eth0 static ip_address=192.168.0.2/24 static routers=192.168.0.1 static domain_name_servers=192.168.0.1 interface wlan0 static ip_address=192.168.0.12/24 static routers=192.168.0.1 static domain_name_...

Wow. That is absolutely what the issue was. I hadn't even realized that through mode was set. Thank you everyone for your help! (now I have to figure out what to do with the second dual hat I just ordered. :D ) Set one for Brandmeister and the other for DMR+ and enjoy both networks! Sent from my Pi...

Scroll down towards the bottom of the ysfgw config and look for the network and change revert from 0 to 1 and ensure that you have the target in the start up (most likely already is) Sent from my Pixel 4 XL using Tapatalk https://uploads.tapatalk-cdn.com/20200522/7b0049dc10b2f539f586ab8e2c1fba41.jpg

I have a pair of Icom IC-F3161DS (VHF) IC-F4161DS (UHF) nxdn radio's.

These fall into the first generation category of radio as they don't have any bells & whistles (no text message or gps)

So for use with mmdvm they get the job done!

Sent from my Pixel 4 XL using Tapatalk

The log files for Pi-star are available in /var/log/pistar and that will be populated with whatever modes you have active. You may want to add tg9999 to your P25 list to disconnect from a given reflector, but it's not necessary to disconnect before keying up another... Also tg10 is the local echo te...