Search found 39 matches
- Fri Apr 10, 2020 10:17 pm
- Forum: Pi-Star General Support
- Topic: Ver 4.1 and Pi zero w
- Replies: 9
- Views: 8283
Re: Ver 4.1 and Pi zero w
Most likely this is just a case of the original poster not being patient enough. A RPi Zero W can take a full minute to become stable when booting, where a 3B+ and a 4B can be stable in 10-15 seconds. The major difference is between a single processor at 1 Ghz, and 4 processors at 1.2, 1.4 or 1.5 G...
- Mon Mar 16, 2020 9:55 am
- Forum: DMR Specific Support
- Topic: DMR Gateway dropping out
- Replies: 24
- Views: 12399
Re: DMR Gateway dropping out
Brilliant, so easy.
Thank you, I'm sure there will be users in .au find this most helpful.
Stephen
- Mon Mar 16, 2020 9:53 am
- Forum: DMR Specific Support
- Topic: DMR Gateway dropping out
- Replies: 24
- Views: 12399
Re: DMR Gateway dropping out
Stephen, I notice your HS is registered against 8/4 (i.e. 3804 is your local? I am also registered there But I do not have any OPTIONS set so I don't know how I got this set. I assume if I have it set I would rather be set to 8/2 (i.e. NSW) but how do I do that? Hi Alan, From my current Expert, Ful...
- Sun Mar 15, 2020 4:45 pm
- Forum: DMR Specific Support
- Topic: DMR Gateway dropping out
- Replies: 24
- Views: 12399
Re: DMR Gateway dropping out
Hi Alan Very short transmissions from DMR+ network seems to give a high packet loss. The longer the transmission the more accurate the packet loss that is reported (0.8 sec gives 42% packet loss). BM seems to drop those initial lost packets. There may be a setting somewhere, but I don't know how to ...
- Sat Mar 14, 2020 4:52 am
- Forum: DMR Specific Support
- Topic: DMR Gateway dropping out
- Replies: 24
- Views: 12399
Re: DMR Gateway dropping out
Seems like you worked it out ok. There seems to be 2 places this can be entered, in the "Configuration" page, General Configuration section. This info must be written to "Configuration/Expert/DMR GW" in the [Info] section. If you edit in the Configuration page it will probably di...
- Tue Mar 10, 2020 6:02 am
- Forum: DMR Specific Support
- Topic: DMR Gateway dropping out
- Replies: 24
- Views: 12399
Re: DMR Gateway dropping out
No worries Alan, I am glad I have been some help.
It is also good to get the parrots and the announcements working on each of the networks. I am getting there slowly.
Stephen
It is also good to get the parrots and the announcements working on each of the networks. I am getting there slowly.
Stephen
- Mon Mar 09, 2020 11:43 pm
- Forum: Pi-Star General Support
- Topic: Read-write 5057 to 234999
- Replies: 8
- Views: 2866
Re: Read-write 5057 to 234999
Ok, understood.
So it seems to be working for you, that's great
Stephen
So it seems to be working for you, that's great
Stephen
- Mon Mar 09, 2020 8:56 pm
- Forum: Pi-Star General Support
- Topic: Read-write 5057 to 234999
- Replies: 8
- Views: 2866
Re: Read-write 5057 to 234999
If it works, that's great. I don't think that you need to specify both time-slots, most likely you only need PCRewrite=2,5057,2,234999,1 You could check which time slot is being used on the Pi-Star Dashboard Alternatively, you could edit the radio/code plug "APRS TG" and replace 5057 with ...
- Sun Mar 08, 2020 4:02 am
- Forum: DMR Specific Support
- Topic: How do I tell Brandmeister I have a hotspot? (New guy)
- Replies: 11
- Views: 6316
Re: How do I tell Brandmeister I have a hotspot? (New guy)
Good to see you got it working.
- Fri Mar 06, 2020 8:23 pm
- Forum: DMR Specific Support
- Topic: How do I tell Brandmeister I have a hotspot? (New guy)
- Replies: 11
- Views: 6316
Re: How do I tell Brandmeister I have a hotspot? (New guy)
It seems "Brandmeister" was obviously confused with "Pi-Star"