forum.pistar.uk

Presuming the board is fully hardware compatible with the R-Pi, the ONLY PiStar releases will be a version of RaspiOS (customized Debian) with the PiStar modules added. Ubuntu would be a stand-alone OS and does not support PiStar. So questions about Ubuntu will need to be taken to either the board m...

Please reference viewtopic.php?t=4362

I have tried to use the ysf2dmr before but never could get it to connect. Maybe because I don't have a DMR radio and was using my Yaesu FT-70D. Still learning about the system. Thanks for the answer. Not relevant to your actual problem but... The purpose of ysf2dmr mode is specifically meant for fo...

It isn't quite clear where you see these ports. Based upon Zum's website, the elite 3.5 is a complete package with LCD and R-Pi 4. Presuming your mystery ports are on the R-Pi 4, then looking up R-Pi 4 documentation would be the proper step. FYI: The R-Pi 4 has TWO (mini) HDMI (video) ports between ...

Okay... with that information I would blame the RF-board. The R-Pi is just passing the digital packets to the RF board for transmission. The only point where I can see the R-Pi being involved is if the serial port (or whatever GPIO) it uses to pass the data is faulty -- but that is unlikely as the R...

That's a lot of static talk groups, and if all you are doing is /listening/ I'd expect Brandmeister to send /any/ traffic on any of them -- no hold (essentually behaving as a carrier-operated scanner, going to the next "channel" when a signal drops on whatever was active). When you transmi...

M1DNS wrote: ↑Sun Oct 30, 2022 1:28 pm Not if its based, as it first seems on risc architecture.

Clarification: RISC-V architecture. The ARM itself is a RISC archtecture (Acorn RISC Machine, back when Acorn wanted their own processor for desktop computers; Acorn is gone, but the processor design house lives on)

Update. I have the same exact issues with Fusion mode. I have a feeling it's an issue with the pi-star TX mode somehow. Probly going to try a factory reset next. If that fails I'll see if I can return the unit for another one. The TX data sounds are the exact same in Fusion and DMR mode so I know t...

I don't know what configuration you have, nor what servers you have configured... Hang time controls how long Pi-Star hangs onto the last active MODE (D-Star/DMR/etc.) before going to a general "listen for all enabled modes" and transitioning to the one that has traffic. It does not contro...

If Brandmeister, and you are shown as a hotspot, not repeater, on their system... Use the interface (did you enable it?) OR BM website to define the talk group as STATIC. Though in the past, the last /hotspot/ activated talk group used to be put into an "auto static" mode -- it would stay ...