Yeah it'll be the value in RX Offset.
found in
../admin/expert/edit_mmdvmhost.php
Sent via smoke signals using my SM-G935F
Search found 1150 matches
- Thu Jan 25, 2024 11:10 pm
- Forum: YSF Specific Support
- Topic: New FT5 not 'seen' by Pi-Star
- Replies: 8
- Views: 937
- Thu Jan 25, 2024 7:25 pm
- Forum: YSF Specific Support
- Topic: New FT5 not 'seen' by Pi-Star
- Replies: 8
- Views: 937
Re: New FT5 not 'seen' by Pi-Star
Youll most prob. need to tweak ur rx offset to better tune to the transmission of the ft5.
Sent via smoke signals using my SM-G935F
Sent via smoke signals using my SM-G935F
- Thu Jan 25, 2024 7:51 am
- Forum: IP Networking
- Topic: How I can change the SSH and WEB Ports?
- Replies: 1
- Views: 485
Re: How I can change the SSH and WEB Ports?
Im fairly sure you can still change the server port using this method. I can't fully recall if changes stop this or not so... Type. rpi-rw Type. sudo nano /etc/nginx/sites-available/pi-star Where you see listen 80 default_server; change that to listen 8080 default_server; Save the file with Ctrl-X R...
- Mon Jan 22, 2024 7:56 am
- Forum: Other MMDVM Modem Boards
- Topic: RepeaterBuilder v4 PTT not working
- Replies: 1
- Views: 534
Re: RepeaterBuilder v4 PTT not working
If ur running f/w 1.6.1 on the board we're not quite ready to support that yet. Its in the works but we'll need to make changes to support the higher data rates of that firmware.
Sent via smoke signals using my SM-G935F
Sent via smoke signals using my SM-G935F
- Mon Jan 22, 2024 7:50 am
- Forum: YSF Specific Support
- Topic: YSF problems after last Pistar upgrades v.4.1.7 – 4.1.8
- Replies: 25
- Views: 3169
Re: YSF problems after last Pistar upgrades v.4.1.7 – 4.1.8
Most of what im seeing is its related to one country... so I wonder if this is related to the no. of IT stations that installed a patch supplied by a couple of their fellow countrymen? It might be interesting for them to try a new burn of 4.1.7 /4.1.8, which will remove the patch. Its seems its a sm...
- Sun Jan 21, 2024 7:45 am
- Forum: MMDVM_HS Hat(s)
- Topic: M17 mode HAT firmware support
- Replies: 8
- Views: 1363
Re: M17 mode HAT firmware support
Hold off at this time. There's more to do to fully incorporate the needs of that f/w update. As of now, you can use pistar with a m17 equipped radio.
Sent via smoke signals using my SM-G935F
Sent via smoke signals using my SM-G935F
- Wed Jan 17, 2024 9:52 pm
- Forum: Pi-Star General Support
- Topic: Wifi
- Replies: 4
- Views: 798
Re: Wifi
Use it to configure ur hotspot to connect to ur home wifi. Once its on ur network you connect to it via its local ip address.
Sent via smoke signals using my SM-G960F
Sent via smoke signals using my SM-G960F
- Wed Jan 17, 2024 9:50 pm
- Forum: ZUMSpot (Hat / Libre / USB)
- Topic: Can I use the HDMI port on my ZUMspot elite 3.5?
- Replies: 1
- Views: 494
Re: Can I use the HDMI port on my ZUMspot elite 3.5?
Google raspberry pi SBC. Most every hotspot is based on a pi of some sorts. That said ... there is no graphical user interface loaded onto the pistar image. The OS needs to support a gui in order to output to a connected screen. pistar was built to run headless, meaning it doesn't make use the HDMI ...
- Wed Jan 17, 2024 7:37 am
- Forum: Pi-Star General Support
- Topic: Changelog 20240105 ??
- Replies: 3
- Views: 8694
Re: Changelog 20240105 ??
EA3BIL wrote:Oky...
And, 20240116 ??
Changed permissable values in config.
Freq. entry now allows upto 23cms band.
re: feedback from repeater owners experimenting with 900mhz / 1.2ghz
Sent via smoke signals using my SM-G935F
- Sat Jan 13, 2024 5:25 pm
- Forum: Pi-Star General Support
- Topic: Is there a way to run simplex hot spot with both Timeslot?
- Replies: 1
- Views: 590
Re: Is there a way to run simplex hot spot with both Timeslot?
No. You need a duplex setup to simultaneously run both slots.
Sent via smoke signals using my SM-G935F
Sent via smoke signals using my SM-G935F