forum.pistar.uk

Wifi is failing I think due to the WiFi Regulatory Domain (Country Code) : drop-down being empty for me.... This is probably because I'm trying to cheat and keep using the old network manager, and not (yet) move to NetworkManager, I may well just not get away with that :( The wireless-regdb package...

The Nextion driver may be in place but the MMDVM configuration changes are not. If you rebuild/refresh a system using a saved configuration that does not have the necessary sections in the MMDVM ini file, then the only way to get those sections added is editing the ini file by hand *or* rerun the Ne...

In simple terms, you can be connected to both eth0 and wlan0 simultaneously but only one of them will be used in any given situation - the system will not automatically switch ("on the fly") between the two if one should disconnect or traffic gets interrupted while in operation. Although t...

You drop the new/revised wpa_supplicant.conf file in the boot directory of the Pi-Star Image SD card while it's mounted on your Windows machine (typically, it's the only directory you can get to via Windows). Remove the card and put it in your Pi and boot and you should be good to go. Alternately, y...

You can plug a mouse and keyboard into the USB ports and a monitor into one of the HDMI ports (or just the monitor alone if you want), but alas you will not have access to the dashboard through any of those devices. The dashboard and all that it details is only accessible via a browser.

Take a look at the appropriate files here:
And modify them as specified according to your needs. Changes/additions editted here are then applied the next time the host files are updated.

You can certain take a shot at it: (<https://www.manageengine.com/products/eventlog/logging-guide/firewall/how-to-enable-logging-and-analyze-linux-firewall-logs.html#:~:text=Use%20the%20following%20command%20to%20enable%20logging%20in,Refer%20to%20the%20syntax%20of%20the%20command%20below%3A>) sudo ...

Just a guess on my part, but your prior adapter may have been failing the way it did because of undervoltage conditions.

Have you tried different adapters? Same behavior for each?

IF you're trying to Drop a QSO, you need to select the Delete option as well. Otherwise, the request will fail.