forum.pistar.uk

Make a backup of your current configuration and then copy it to the root of your new image, reboot with the new image (wait a bit) and then log back in and double check the configuration. when moving up from earlier releases that might not help you. Given there are a lot of additions made to the la...

You are right, that won’t work, but that isn’t what I am trying to do. I am trying to disconnect TS 1 while it is busy by sending a 4000 to TS 1. This is not working. (Same for TS 2 - a call to 4000 on TS 2) Ok, I obvs. misunderstood what you were trying to do. Now i know, Im still not aware of thi...

Is this even a thing ???
How could this work ???

If ts2 is busy, how would keying ts1 with an unlink call tg4000 drop ts2. It'll just drop whatevers connected on ts1.

I dont know where you heard this but, i can't see how that could work.

Sent from my SM-G935F using Tapatalk

Pass through is also used for controlling crossmode links. Like selecting DMR TG's if using ysf2dmr or other modes when using ysf2...

Sent from my SM-G935F using Tapatalk

Pistar.uk/download 4.1 release build supports raspberry pi foundation boards. To date there has been no futhur development for the other SBC's, they still stand at 3.4.17

Sent from my SM-G935F using Tapatalk

The mmdvmhost that supports fm is already in the latest pistar releases. You'll need to update the firmware in ur repeater board thats as long as it supports FM. You could get going now if you wanted by copying the FM config manually editing mmdvmhost.ini [FM] Enable=1 # Callsign= CallsignSpeed=20 C...

Close, stopped Is a reflection that the mmdvm service has stopped and closed. It needs to stop as the changes are implemented to take effect when restarted. Scroll and screensaver settings can be changed on the mmdvmhost expert page. admin/expert/edit_mmdvmhost.php look at the display section. Sent ...

There's no way to link directly to a wires x room. Yaesu run a closed network that doesn't permit direct access to anything except their own hardware solutions. You'll need to have your friend create an rf bridge via an FCS YSF to his room, then you can connect to him through that. Sent from my SM-G...

The back end is already done. But currently none of the config page entries have been built.

Sent from my SM-G935F using Tapatalk

Why are they using tg8802? if the groups located in the U.S. they shouldn't be using a tg outside their MCC? 88**** would belong to a different country/ master. US TG's are allocated 3***** ??? Unless I'm misreading ur reply, could be why you can't see it if it's not listed in pistars BM x-link list...