Search found 20 matches

by oz1cbk
Thu Jun 13, 2019 9:10 am
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11860

Re: Firmware update problem

I don't see anything that looks wrong in what you are doing or the settings displayed. Sometimes you just have to run the flash command a few times in a row until it cooperates, I am not sure what causes that, but its nothing you are doing. Thank You very, very much. And thanks to Kevin also. I hav...
by oz1cbk
Wed Jun 12, 2019 1:01 pm
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11860

Re: Firmware update problem

Thank You for trying to help me.

I have made a .PDF file when I try with Florin's board. It is attached here. I hope You can see what is wrong.

Ole.

Hmm, I have to zip the file to send it.
by oz1cbk
Tue Jun 11, 2019 9:24 pm
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11860

Re: Firmware update problem

ok, so the command for that board is: sudo pistar-mmdvmhshatflash hs_hat Do you see now, how you ran the wrong command to install the firmware in the ZUMSpot board in your very first post in this thread? No, I am so confused. I have tryed this: sudo pistar-mmdvmhshatflash hs_hat and both board is 1...
by oz1cbk
Tue Jun 11, 2019 9:28 am
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11860

Re: Firmware update problem

Now, that the ZUMSpot is out of the way, the board by Florian, requires a different firmware, but the issue is, I cannot tell you which command to use because you haven't given me enough information to determine it. Is it a duplex, what TXO crystal does it use? Either way, the instructions for that...
by oz1cbk
Tue Jun 11, 2019 7:08 am
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11860

Re: Firmware update problem

And after this: rpi-rw git clone https://github.com/juribeparada/MMDVM_HS pi-star@pi-star(rw):~$ cd MMDVM_HS pi-star@pi-star(rw):MMDVM_HS$ cd scripts Then I have this ls build_fw.sh install_fw_duplex.sh install_fw_hshat.sh install_fw_rpi.sh install_buildtools.sh install_fw_gen_gpio.sh install_fw_li...
by oz1cbk
Sun Jun 09, 2019 9:38 am
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11860

Re: Firmware update problem

I believe you have used the incorrect firmware for a true zumspot board. If indeed you have the official zumspot board then you use the command: sudo pistar-zumspotflash rpi I used this command and it it a true ZUMSpot: sudo pistar-mmdvmhshatflash hs_hat I think you can just reflash the zumspot fir...
by oz1cbk
Sat Jun 08, 2019 2:26 pm
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11860

Re: Firmware update problem

Hi again. Dont ask how I got this - I dont remember, but I found this in a old file an copy the line I use: rpi-rw git clone https://github.com/juribeparada/MMDVM_HS pi-star@pi-star(rw):~$ cd MMDVM_HS pi-star@pi-star(rw):MMDVM_HS$ cd scripts ./install_fw_rpi.sh Then reboot the Pi. Wupti it work agai...
by oz1cbk
Sat Jun 08, 2019 1:51 pm
Forum: ZUMSpot (Hat / Libre / USB)
Topic: Firmware update problem
Replies: 9
Views: 11860

Firmware update problem

Hi. I just run sudo pistar-mmdvmhshatflash hs_hat on my Pi with Zumspot. It have run FW 1.4.16 on ZumSpot for a long time, but after update it looks like it will send the option line again and again. And stations dont come to the radio anymore. Show up on Nextion display. Is it a error in the update...
by oz1cbk
Sat Apr 27, 2019 11:35 am
Forum: Raspberry Pi Foundation Hardware
Topic: Update a Dv-Mega on a Arduino Uno via Pi-Star
Replies: 1
Views: 2571

Update a Dv-Mega on a Arduino Uno via Pi-Star

Hi.
Can I update it via Pi-star ? I can't figure out how, and think the answer is here somewhere 8-)

Image

Thanks. Ole - OZ1CBK
by oz1cbk
Fri Apr 27, 2018 12:30 pm
Forum: Tips and Tricks
Topic: When was my Pi-Star booted
Replies: 15
Views: 20939

Re: When was my Pi-Star booted

I just have to try that ;) and it works.
Thank You.

Ole - OZ1CBK