forum.pistar.uk

How are you getting a zip file?? If you use Wifi builder as linked in my first message it will download wpa_supplicant.conf It's a text file. drag and drop it onto your SD card.. ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 ap_scan=1 fast_reauth=1 country=JP network={ ssid...

Not sure why you're using an unzip program. 1. Enter your wifi info here: http://www.pistar.uk/wifi_builder.php and download the wpa_supplicant.conf file. 2. remove the SD card from the Pi0 and insert it in your computer (adapter may be necessary) 3. Click the drive letter assigned to the card. If w...

Never mind, it does error flashing it. Just it says it was successful at the end so I didnt really look at it. Using Parser : Raw BINARY Interface serial_posix: 57600 8E1 Failed to init device. Usually when this is seen, pins 38 and 40 aren't connected to the hat.. I'd check to make sure they are, ...

KD9JTV wrote: ↑Mon May 28, 2018 3:31 pm

KE0FHS wrote: ↑Mon May 28, 2018 2:08 pm

I picked up one of these little 5v fans

Where did you plug in the fan?

My Nextion came with a little board that is USB on one end and +5v/Ground on the other. I used that board to power the fan.

-Jeff, K9JTV

I like this idea better also

Pin2 for +5v and pin3 for ground.

I get consistent 0.0 using either my Zumspot or Jumbospot, and with either HT. MD-380 or Anytone 868UV

Glad ya got it fixed. The American flag screen was the one that had TG and TS reversed for me..

Sent from my SM-G950U using Tapatalk

I had this issue on my 2.8 with the TS and TG lines. Just swapped values (X. Y. W. H) from one to the other and everything lined up.

If you can find the actual ip address, try that. Some mobile browsers dont play well with .local

Sent from my SM-G950U using Tapatalk