forum.pistar.uk

If ur running f/w 1.6.1 on the board we're not quite ready to support that yet. Its in the works but we'll need to make changes to support the higher data rates of that firmware.

Sent via smoke signals using my SM-G935F

Most of what im seeing is its related to one country... so I wonder if this is related to the no. of IT stations that installed a patch supplied by a couple of their fellow countrymen? It might be interesting for them to try a new burn of 4.1.7 /4.1.8, which will remove the patch. Its seems its a sm...

Hold off at this time. There's more to do to fully incorporate the needs of that f/w update. As of now, you can use pistar with a m17 equipped radio.

Sent via smoke signals using my SM-G935F

Use it to configure ur hotspot to connect to ur home wifi. Once its on ur network you connect to it via its local ip address.

Sent via smoke signals using my SM-G960F

Google raspberry pi SBC. Most every hotspot is based on a pi of some sorts. That said ... there is no graphical user interface loaded onto the pistar image. The OS needs to support a gui in order to output to a connected screen. pistar was built to run headless, meaning it doesn't make use the HDMI ...

EA3BIL wrote:Oky...

And, 20240116 ??

Changed permissable values in config.
Freq. entry now allows upto 23cms band.

re: feedback from repeater owners experimenting with 900mhz / 1.2ghz

Sent via smoke signals using my SM-G935F

No. You need a duplex setup to simultaneously run both slots.

Sent via smoke signals using my SM-G935F

It is the biggest DMR network for certain, with the busiest TG's so you wont be long before you find someone to chat with. Be mindful though worldwide, and statewide TG's have 10min defaults where your encourage to move to other tgs (TAC groups) if you want to chew away for longer overs. Have a look...

Dont enter ur ID as the full 9 digit group. Use the default 7 digits and add the SSID using the drop down in the DMR section of the config. Id say from the error message something is not configured correctly. BM have a check in place to ensure ur setup is what you say it is. Duplex = two freqs enter...

Usually youll see Initialising when the setup is trying to connect to a home network. Without a net connection the services wont start up.

Log into ur router and check if it sees the hotspot connected.

Sent via smoke signals using my SM-G935F