forum.pistar.uk

Yep.

3 of my Pi-Star 4.2.1 hotspots are sitting there and continuously restarting, going offline, initialising, rinse and repeat.

Thanks Andy, very much appreciated

Will STM32F1xx modem boards support higher serial speeds than 115200? I know that they're not fast enough for FM, but OK with digital modes?

What is the MMDVM board you are using? You need to check a few things, the mobile WiFi you want to connect to needs to match the bands available on the Pi. This is likely to be 2.4GHz only on older Pi models, I can't remember what a 3+ has by the way of WiFi capability. If the Pi and MMDVM are worki...

There is definitely some interaction on my FT-3D. Radio FM deviation WIDE, YSF LowDeviation 0 = works. Radio FM deviation NARROW, YSF LowDeviation 0 = NOT working. Radio FM Deviation NARROW, YSF LowDeviation 1 = works. Radio FM deviation WIDE, YSF LowDeviation 1 = NOT working And my BER is in the g...

I should have mentioned the findmdem command reports it a AFD7021 chip but does not show frequency. Is a clone classed as generic? I don't know how the various different names have evolved, all I can say is that everything works fine for me using the 2nd entry in the list. It is entirely possible t...

Very probably 14.7456MHz, it's essentially a clone of the DB9MAT/DF2ET board.

I now have YSF working again with 4.2.0 beta. The change that fixed it was setting LowDeviation to 1 in the MMDVMHost settings. Mode on my FT-3D is set to DN. I'll go away and research what this does. DN and VW mode have the same modulation parameters but use different codecs and hence the packet c...

G6JUP wrote: ↑Mon Jan 29, 2024 12:40 pm I used the new FW tool to update the firmware using new tool which was successful, thanks another brilliant pi-star innovation.

Well, you need to thank Chip W0CHP for it, it's been generously shared (I know, open source) so that Pi-Star benefits from it.

I now have YSF working again with 4.2.0 beta. The change that fixed it was setting LowDeviation to 1 in the MMDVMHost settings. Mode on my FT-3D is set to DN. I'll go away and research what this does. DN and VW mode have the same modulation parameters but use different codecs and hence the packet c...