Search found 27 matches
- Wed Aug 14, 2019 1:28 pm
- Forum: D-Star Specific Support
- Topic: Strange behavior in ICOM Terminal Mode
- Replies: 1
- Views: 1985
Re: Strange behavior in ICOM Terminal Mode
My error. On closer inspection the radio headers are where I see DIRECT in RPT1 and RPT2 -- the received signals. My transmitted lines are always KA2Y G for RPT1 and KA2Y B for RPT2. "M: 2019-08-14 02:40:56: Transmitting to - My: KA2Y B/ Your: KA2Y Rpt1: KA2Y G Rpt2: KA2Y B Flags: 01 00 00 M: 2...
- Wed Aug 14, 2019 3:16 am
- Forum: D-Star Specific Support
- Topic: Strange behavior in ICOM Terminal Mode
- Replies: 1
- Views: 1985
Strange behavior in ICOM Terminal Mode
4.1 rc3 - in the course of a conversation, looking at "live logs" I see my rpt1 and rpt2 switch from KA2Y b, KA2Y G to DIRECT, DIRECT and next transmission is back to normal. ???
- Tue Aug 13, 2019 8:38 pm
- Forum: D-Star Specific Support
- Topic: DStar DTMF control in ICOM Terminal Mode?
- Replies: 3
- Views: 2956
DStar DTMF control in ICOM Terminal Mode?
Are there DTMF commands to control Pi-Star from the keypad of my ID-4100a connected to my Rpi0w via the terminal mode? Such as shutting the Rpi down, changing Reflectors, unlinking, hearing which Reflector I am connected to (if any)? I see there is a DTMF off/on in the config but I cannot find any r...
- Sat Jun 01, 2019 8:31 pm
- Forum: IP Networking
- Topic: Using ipv6 and Pi-Star 4.0.0.RC4?
- Replies: 12
- Views: 17486
Using ipv6 and Pi-Star 4.0.0.RC4?
How can I accommodate ipv6 addressing on Pi-Star? My Router and ISP are configured for ipv4 and ipv6.
- Sun Nov 11, 2018 2:56 pm
- Forum: YSF Specific Support
- Topic: DMR2YSF and call sign display on dashboard
- Replies: 7
- Views: 6587
Re: DMR2YSF and call sign display on dashboard
Addendum: Using a Pi Zero W Rev 1.1 and a Zumspot HAT firmware 1.4.8 20181107 dashboard on 3.4.16, - turned off the Nextion display setting in the Pi-Star configuration and physically disconnected it from the Pi (USB connected), reducing the computing load, seems to have helped pretty much on the di...
- Sat Nov 10, 2018 9:01 pm
- Forum: YSF Specific Support
- Topic: DMR2YSF and call sign display on dashboard
- Replies: 7
- Views: 6587
DMR2YSF and call sign display on dashboard
I have been playing with DMR2YSF and have found an oddity. One hotspot with a ZUMspot has difficulty staying connected to FCS reflectors. Another with a DVMega Dual-band radio stays connect to FCS00290 quite well. ??? I do have uPnP YES in configuration. If I change hotspots, what do I need to do wi...
- Mon Sep 17, 2018 10:52 am
- Forum: DV-Mega Hat(s)
- Topic: Using Pistar to flash DVMEGA hat on a RPi
- Replies: 18
- Views: 29126
Re: Using Pistar to flash DVMEGA hat on a RPi
Supposedly the 3.26 firmware is available. However, I got the infamous "404" when trying to download. pi-star@pi-zero-dmr(ro):tmp$ wget --tries=3 http://www.dvmega.auria.nl/images/DVMEGA_RH_V326_UNO.zip --2018-09-17 06:49:09-- http://www.dvmega.auria.nl/images/DVMEGA_RH_V326_UNO.zip Resolv...
- Fri Sep 07, 2018 2:34 pm
- Forum: Raspberry Pi Foundation Hardware
- Topic: will not connect to wifi but AP is working and I can connect to the AP
- Replies: 2
- Views: 2746
Re: will not connect to wifi but AP is working and I can connect to the AP
I do not know what went on, but I just turned the bad Raspberry Pi Zero W back on and it connected to my wifi but got a new IP address. ??? In any case it is working now.
- Fri Sep 07, 2018 1:14 pm
- Forum: Raspberry Pi Foundation Hardware
- Topic: will not connect to wifi but AP is working and I can connect to the AP
- Replies: 2
- Views: 2746
will not connect to wifi but AP is working and I can connect to the AP
Raspberry Pi Zero W - Zumspot board on it. This morning it will not connect to any of my wifi networks, but the AP connection is up and running - I can connect to the Pi Zero with my laptop if I select AP as the network. ??? It was working fine last evening. No Router changes. I pulled another Raspb...
- Mon Jun 04, 2018 9:13 pm
- Forum: NXDN Specific Support
- Topic: Only NXDN Startup Host is 65000
- Replies: 6
- Views: 5157
Re: Only NXDN Startup Host is 65000
I was using 65000 just fine a couple of days ago - (Before 20180602?) but now, "none" will not stay elected. I have contacts and channels with both 765000 and 65000 and have tried DMR2NXDN and DMRGateway. I hear nothing on 65000 NXDN and no one responds. I have adjusted RXoffset to +225 wi...