forum.pistar.uk

Thanks For your remarks Andrew,i was really wrong
73
Kai
dh3ybe

Hi,

Im you press transmit Button on Text, what do you See i pi-Star Admin area in the Life log? You can Save That Life log on your Desktop Computer.

Im you have an dm anlog thx, do you hear a digital Signal Ehen you press the ptt of your digital tragen?

73
Kai
dh3ybe

Hi, best wishes for 2021. You can conncect to a repeater: set URcall to "CALL BL" (B --> repeater call is on VHF use mode B, L for Link). I programmed that in the trx and it works. URcall "CALL BU" to unlink. Does not work in the pi-star software, you have to do it with your trx ...

wrong DMR ID?
could annother dmr receiver decode your dmr signal from the origin trx?

So, you have to investigate, if the problem is hot spot related or trx related.

BR
KAi

Hello,

best wishes for 2021.

Check "§life log", when you transmit.

Same TRX for YSF and DMR? DMR is very sensitive concerning difference between tx-frequency of trx and rx-frequency of hot-spot.

BR
73
Kai
dh3ybe

Hi, best wishes for 2021. : 2020-12-31 01:54:17.328 D-Star, received RF header from KJ7ITZ /D74 to CQCQCQ M: 2020-12-31 01:54:18.064 D-Star, received RF end of transmission from KJ7ITZ /D74 to CQCQCQ , 0.9 seconds, BER: 0.0%, RSSI: -47/-47/-47 dBm M: 2020-12-31 01:55:20.643 D-Star, received RF heade...

Hello, best wishes foe 2021. If you put a small monitor whith hdmi interface or vga and vga-hdmi-adapter at the RAspberrty PI, the WLAN IP will be shown on the monitor afzer end of booting. If you are using pistar with mmdvm hat and you connect an oled screen or somthing else to the mmdvm hat, the w...

Hi, please update and upgrade pistar, like the other hams suggested. I bigger sd card makes abolutely sence, becasue otherwise you can get in trouble with the linux os. It makes also sence to update firmware of the mmdvm hat, if your hotspot has one. After that look, if receiving signals of the net ...

Hello, I want to share my experience with programming the icom ic-e80d handheld transceiver with pistar hotspot with mmdvm-simplex-hat. I configured the hotspot and did update and upgrad of trhe pi-star system and of the mmdvm-firmware. Receiving signals work very well and even i could change an the...

Hello, you should try to receive dmr signals from a local repeater. If that works, you know that your receiver is working. Quite often a misconfigration of the trx as described before might be the reason. MAybe you have to shift rx and tx freqiency of the hotspot. But 1st try to receive dmr signals ...