forum.pistar.uk

I am sorry. I know nothing about the WPS system you talk about. However there are 4 D-Star protocols and the Pi-Star DMR->XLX does not handle all of them. The ones I am familiar with are REF,XRF,XLX, and DCS. For instance. I connect to XLX103. This does not use XLX protocol and as such pi-star XLX w...

Read This
Much better explanation than what I provided.
https://www.k2ie.net/blog/2019/04/22/pi ... or-xlx020/

From the ETSI Spec

I run XLX thru the DMRGateway Pi-Star DMR Configuration DMR Master = DMRGateway XLX Master = 295 Module = B /etc/dmrgateway [XLX Network] Id=3023954 Startup=295 Module=B Enabled=1 File=/usr/local/etc/XLXHosts.txt ##This file automatically Updated Port=62030 Password=passw0rd ReloadTime=60 Slot=2 TG=...

The Anytone D878UV Plus and The Anytone D878UVII Plus both have the following options for setting a simplex channel. DMO/Simplex DCDM TS Split DCDM/Double Slot Radio 1 - Anytone D878UV Plus Radio 2 - Anytone D878UVII Plus Both radios on the same simplex frequency DMO/Simplex (the most popular mode I...

Interesting tibit from the Shark Openspot 3 manual – You can set the TDMA channel for data in DMO mode. DMO mode is enabled if the modem’s RX and TX frequencies match, or the modem is in DMR Hotspot mode. In this case, only one TDMA channel will be used for communication. Note that on BrandMeister, ...

This is why the Tier 1 MD398 cannot be used on a Repeater - Data is transmitted on both time slots at the same time. https://media.discordapp.net/attachments/820793120261931059/1164304267058888775/image.png?ex=6542b9d8&is=653044d8&hm=771505114773d1749afb2bc1b96d63fb9e81ba276c5101110016e9d18f...

Programmed two Anytone D878's as follows, all on the same simplex frequency 1 TS1 Simplex Mode 2 TS2 Simplex Mode 3 TS1 Repeater Mode 4 TS2 Repeater Mode makes no difference which mode I transmit on the other radio will respond regardless of which mode I select on it Also the MD398 (TS1) opens both ...

I have a simple question for the REAL DMR guru. 1) Does DMR Simplex work on TS1, TS2 or does not matter 2) Does DMR Simplex use the full 12.5KHz I have conducted the following tests I have a TYT MD398 which is Tier 1 only at 12.5Khz and talks quite nicely to my Anytone D878 on CC1 TG99. I have a pi-...

Thanks for the reply. I did get it sorted out Reflector XLX103 does not actually use the XLX protocol, at least it did not for me. It does however use DCS, REF, and XRF. Once I connected via an openspot 3 using the DCS Mode, it started working OK. The XLX103 dashboard does show what modes it can han...