forum.pistar.uk

Well this kinda whats happening: TGRewrite1=1,310195,2,310195,1 <== I thought this should rewrite any 310195 on slot one to slot two and put on network 4 TGRewrite2=2,310195,2,310195,1 <== I thought this should rewrite any 310195 on slot two (from above or RF) to slot two on network 4 TGRewrite3=2,3...

Hi, and thanks for reading. I have the below network setup, the problem is the TGRewrite's do not seem to do what I think they should do. If you transmit on TG#310195 on slot 1 or 2 it should go out on slot 2. If you transmit on TG#311887 on slot 1 or 2 it should go out on slot 1. All other traffic ...

FYI, I was able to get it working as designed... Did you?

Did you ever get this figured out? I now have the exact same setup and issue. I think your rewrite might be incorrect but it goes along with me not understanding all of this just yet: My issue is the same but different; I use 62033 for dual slot hotspots to link to HBlink3. I then take slot 1 to one...

FYI, 62030 and 62031 are only two holes....I had to add 62033 via the customer firewall script

I have HBLink3 running with three masters. 62030 master 62031 outgoing PEER for BM 62032 ALLSTAR 62033 repeater My 4.1.x hotsopt will connect to 62033 with no issues using the DMRgateway settings. Our club repeater is running 3.1.17 abd will not connect to 62033. Is there any different in versions a...

All, we have a repeater running PI-STAR with a STM32 board. I would liek to have Slot1 connect to XLXxxx module B and SLot2 connect to XLXxxx module A. Is there any way to do that in the current build? I know I can use HBlink but was hoping for a internal solution. NOTE: The repeater has limited acc...

The issue is the first time you use a XLX reflector you need to tell it what TG you want to use. This is NOT done from the radio, it is done under expert, "DMR GW". My club is using a private reflector and everyone conencts to it, we also have that connected to our repeater TG from Brandmi...

Andy, what USB GPS is recommended? Will any $10 GPS from eBay work? Which one are you testing with?

W8DSB

I have a HS-HAT running 1.4.17 it works in every way I can use it. It is a dual HAT that I will run as a simplex HAT (have to change driver in version 4). When I tried to use pistar-mmdvmcal I get no errors however I cannot see it on the SDR radio sitting next to it. If I put it back into regular se...