The original

Post information / pictures of your gear here!
Post Reply
G4KLX
Posts: 4
Joined: Tue Oct 02, 2018 7:08 am

The original

Post by G4KLX » Thu Oct 11, 2018 7:11 am

This is a photograph of the original MMDVM which was used for all development work. It includes a UMP in the picture which had only just been created, a few days before. The Arduino Due and ZUM modem board have now been replaced by a board from Toufik F0DEI based on the Teensy 3.6.
Attachments
Again.jpg
Again.jpg (180.26 KiB) Viewed 335 times

User avatar
KE0FHS
Posts: 312
Joined: Wed Apr 11, 2018 8:40 pm
Location: Colorado, USA
Contact:

Re: The original

Post by KE0FHS » Thu Oct 11, 2018 1:35 pm

When is the new Digital Voice wing of the Computer History Museum in Mountain View opening?
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
http://pi-star.hamnotes.com

2E0LGZ
Posts: 42
Joined: Sat Jun 16, 2018 3:10 pm

Re: The original

Post by 2E0LGZ » Fri Nov 02, 2018 9:07 pm

Hi Johnathon thanks for posting the pic it looks great where did you acqure the data radios from i would be interested in one of those for a node radio
thanks for all the hard work
Gary 2E0LGZ

G4KLX
Posts: 4
Joined: Tue Oct 02, 2018 7:08 am

Re: The original

Post by G4KLX » Wed Nov 07, 2018 1:36 pm

Hi Gary

I ordered them from a company in California over three years ago. They have since been replaced by the FC302/D which people have had problems with. You may just as well get an old Motorola GM340 or GM360 as they seem to work well, and cheaper too.

Jonathan G4KLX

2E0LGZ
Posts: 42
Joined: Sat Jun 16, 2018 3:10 pm

Re: The original

Post by 2E0LGZ » Wed Nov 07, 2018 1:50 pm

Hi Johnathon you’re probably right i have seen a lot of references to motorolas etc i’ll look into them
thanks for the reply
best regards
Gary 2E0LGZ

Post Reply