New Kid On The Block

If you just want to say hello, start here!
GM0VWZ
Posts: 7
Joined: Fri Jul 20, 2018 7:44 pm

Re: New Kid On The Block

Post by GM0VWZ » Fri Aug 17, 2018 6:30 pm

Hi Toshan
Thats good news for all I would say Iam right in the middle of some work projects at the moment
that have to take top priority, so It will be a few week before I can have a look at it but I will let you know how I get on

Thanks for the info

Sam

GM0VWZ

GM0VWZ
Posts: 7
Joined: Fri Jul 20, 2018 7:44 pm

Re: New Kid On The Block

Post by GM0VWZ » Fri Oct 12, 2018 6:35 pm

Hi guys been a way a while due to work commitments, and vacation, but finally manage to get the configuration page up on pi-star for the Zumspot . Not the way I would have liked through wifi as it just
Wouldn’t connect this way. So I took the advice given by Dennis AF6VN and used the R-Pi 3 and cat-5 cable to connect it to my router and bingo all was well. So I would just like to thank everyone for their comments and advice during this hair pulling phase. Thank you all very much for your help it was very much appreciated. Hope to catch you all again when my next problem raises its ugly head.

Sam

GM0VWZ

Post Reply