Orange Pi Zero - 4.1.4 beta posted

Help with the Orange Pi Zero
Post Reply
User avatar
MW0MWZ
Site Admin
Posts: 1283
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Orange Pi Zero - 4.1.4 beta posted

Post by MW0MWZ »

Beta image for Orange Pi Zero posted in the beta section https://pistar.uk/beta/
Andy

73 de MW0MWZ
http://pistar.uk
User avatar
K1IMD
Posts: 19
Joined: Thu Apr 12, 2018 2:42 am
Location: Long Island, NY USA

Re: Orange Pi Zero - 4.1.4 beta posted

Post by K1IMD »

Awesome Andy!

Thank you for the upgrade... I will give it a try tomorrow evening!

Thank you!
73
K1IMD
73!
K1IMD
User avatar
K1IMD
Posts: 19
Joined: Thu Apr 12, 2018 2:42 am
Location: Long Island, NY USA

Re: Orange Pi Zero - 4.1.4 beta posted

Post by K1IMD »

Good Evening Andy,
I have been running 4.1.4 beta on my Orange Pi Zero for almost a week and it seems to run just fine. The only caveat is that my repeater only runs straight DMR bridged to a c-Bridge.

I am going to attempt upgrading the firmware my Neo powered mmdvm this weekend and will report on that repeater after I run it for a bit.

Thank you so much for the port!

73
Jon
K1IMD
73!
K1IMD
User avatar
MW0MWZ
Site Admin
Posts: 1283
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: Orange Pi Zero - 4.1.4 beta posted

Post by MW0MWZ »

Good to hear!
Andy

73 de MW0MWZ
http://pistar.uk
JE4SMQ
Posts: 5
Joined: Thu Apr 12, 2018 11:54 am

Re: Orange Pi Zero - 4.1.4 beta posted

Post by JE4SMQ »

It works well OrangePI Zero LTS.
But...Temp seems bad.
Attachments
p1.jpg
p1.jpg (16.72 KiB) Viewed 546 times
User avatar
MW0MWZ
Site Admin
Posts: 1283
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: Orange Pi Zero - 4.1.4 beta posted

Post by MW0MWZ »

Not surprised, its not built for that board :)
Andy

73 de MW0MWZ
http://pistar.uk
Post Reply